search

makerbase-mks / MKS-Robin

MKS Robin is a powerful 32-bit 3D printer control board with STM32F103ZET6 . Support Marlin2.0. Support MKS Robin TFT24/28/32... Screens. The motherboard integrates 5 AXIS interface, hot bed, 2 heating heads, 3 NTC100K, 2 MAX31855.Support MKS Robin WIFI for cloud printing.Supports firmware update by SD card…
https://es.aliexpress.com/item/32757129463.html?spm=a219c.12010612.8148356.9.5fc165f4oDUfFM
131 stars 129 forks source link

steps/mm #71

Open killerage opened 5 years ago

killerage commented 5 years ago

even if I change values the movement doesn't change , any idea?

killerage commented 5 years ago

so I managed to move it , but I have to got to 800 which makes the printer super fast I can't print like that

mattdog01 commented 5 years ago

Hello Killerage, I'm not sure what the issue is but I'll try to help.
To change the configuration of the Robin you need to change the config file when it is in TEXT FILE (.txt) format and then save that to your sd card, put it in the Robin and then turn on power to start the Robin. When the Robin starts it reads the .txt file makes the changes to the firmware settings and then it edits the file extension type so that it does read it again. If you want to changes the settings again then the config file needs to be in the .txt format or at startup the Robin ignores the file. To set your steps per mm use the Prusa calculator for x, y and z.
Find that here>>>https://www.prusaprinters.org/calculator/ E is calibrated by running some filament through the extruder and measuring how much went through. I hope this helps but if not repost and we can try again. Matt