makerbase-mks / MKS-Robin2

MKS Robin2 is a powerful 32-bit 3D printer control board with STM32F407ZET6 . the CPU 168MHZ. Support MKS Robin TFT35 Screens, use RobinTFT35 can preview model. The motherboard integrates 5 AXIS interface, hot bed, 2 heating heads, 3 NTC100K, 2 MAX31855.Support MKS Robin WIFI for cloud printing.Supports firmware update by SD card…
https://www.aliexpress.com/item/33006653472.html?spm=2114.12010612.8148356.3.334a65f4LZBtt2
17 stars 12 forks source link

Problem Firmware Update #8

Closed JanHH2019 closed 4 years ago

JanHH2019 commented 4 years ago

I have a mks robin2 v1.0 and wanted to install the latest firmware V1.0.3. Unfortunately that doesn't work, he loads the firmware, transfers the font and PIC files and then says "complete". When I turn the board off and on again, the message booting comes up and nothing happens. Have already tried the older versions of firmware V1.0.1 and V1.0.2, all with the same result. What can I do now?

makerbase-mks commented 4 years ago

Can you provide your Robin2 firmware updating process?

JanHH2019 commented 4 years ago

This version i have use first time ::

https://github.com/makerbase-mks/MKS-Robin/blob/master/MKS%20Robin2/Mks_Robin2_V1.0.3%20Release%20file.rar

I also tried these two versions ::

https://github.com/makerbase-mks/MKS-Robin/blob/master/MKS%20Robin2/History%20version/Mks_Robin2_V1.0.2%20Release%20file.rar

https://github.com/makerbase-mks/MKS-Robin/blob/master/MKS%20Robin2/History%20version/Mks_Robin2_V1.0.2%20Release%20file.rar

2020-09-22 07 45 54 2020-09-22 07 46 08 2020-09-22 07 45 07 2020-09-22 07 45 11 2020-09-22 07 45 15 2020-09-22 07 45 31 2020-09-22 07 45 49

this is what the content of the sd card looks like after trying to boot :: nachboot

JanHH2019 commented 4 years ago

The problem is solved. I also wrote to Makerbase in the Facebook chat and got the tip there to format another SD card or to format the SD card. I have now done that and then the update runs through, it now also shows that it is reading in the PIC's and the fonts again and then the board starts correctly. Thank you for the effort..