makerbase-mks / MKS-SBASE

MKS SBASE is a powerful 32-bit 3D printer control board with LPC1768. Support Marlin2.0, Smoothieware. Support MKS LCD12864 and MKS TFT Touch Screens(SBASE V1.4 support MKS LCD12864A/MINI12864/LCD2004). The motherboard integrates 5 DRV8825 axis and it is use software set current, supports wired network for printing and supports firmware update by SD card…
https://www.aliexpress.com/item/32384368763.html?spm=2114.12010612.8148356.13.f6ef39440hYPmP
157 stars 112 forks source link

LPC1768 replace #104

Closed badyl00 closed 4 years ago

badyl00 commented 5 years ago

Hello. I have problem with MKS BASE v1.3 board. After print I saw temperatures from TH1 and TH2 giving strange values (385 deg and 187 deg). I remove the board and saw a smal hole in LPC IC. I ordered new ic for change. If chip is replaced I need to program it or only insert SD card to slot ?

makerbase-mks commented 5 years ago

You need to flash BootLoader of LPC1768, Because Smoothie updating firmware by Bootloader. You can refer to : https://tieba.baidu.com/p/4258590897