MKS SBASE is a powerful 32-bit 3D printer control board with LPC1768. Support Marlin2.0, Smoothieware. Support MKS LCD12864 and MKS TFT Touch Screens（SBASE V1.4 support MKS LCD12864A/MINI12864/LCD2004）. The motherboard integrates 5 DRV8825 axis and it is use software set current, supports wired network for printing and supports firmware update by SD card…
Encounteres a bug that made my printer inoperable. In some areas of my brinting volume printer wil lift print head up about 0.2mm and move down when moving back through this "border". It seems like it always does this by stopping Z tower stepper motor for a fraction of a second. Anyone encountered this? Any fix? May be there is some leveling grid or something, but it is disabled in config. Tried firmware from here and few versions from smoothieware. Steppers are 0.9degree, board on 32 microstepping, 400 steps per mm.
Encounteres a bug that made my printer inoperable. In some areas of my brinting volume printer wil lift print head up about 0.2mm and move down when moving back through this "border". It seems like it always does this by stopping Z tower stepper motor for a fraction of a second. Anyone encountered this? Any fix? May be there is some leveling grid or something, but it is disabled in config. Tried firmware from here and few versions from smoothieware. Steppers are 0.9degree, board on 32 microstepping, 400 steps per mm.
video - https://www.youtube.com/watch?v=UhKsl0GsRks
config - https://drive.google.com/open?id=1pgX4WxY5W2cT3bpTStmcSQbHWYV0655J