search

makerbase-mks / MKS-SERVO42B

MKS SERVO42B is 3d printer closed loop stepper motor NEMA17 MKS SERVO42 developed by Makerbase that prevents losing steps. CPU is STM32F103C8T6 ARM 32-bit Cortex™-M3 CPU Core,72 MHz. Magnetic encoder is Allegro's A1333LLETR-T Contactless 0° to 360° angle sensor IC ,12bit .This Project open source hardware and code,support platformio build and upload firmware...
https://www.aliexpress.com/item/33032696338.html?spm=a2g0o.store_home.productList_8356958.pic_1
GNU General Public License v3.0
166 stars 70 forks source link

Can you add BOM? #14

Closed dzid26 closed 3 years ago

dzid26 commented 4 years ago

Can you add BOM to go along the schematics to understand the board operation better?

ramonbastos commented 3 years ago

Can you add BOM to schematics?

makerbase-mks commented 3 years ago

Hi! You can refer to https://github.com/makerbase-mks/MKS-SERVO42B/blob/master/hardware/MKS%20SERVO42B%20V1.0_003/MKS%20SERVO42B%20V1.0_003%20BOM.pdf