search

makerbase-mks / MKS-SERVO42B

MKS SERVO42B is 3d printer closed loop stepper motor NEMA17 MKS SERVO42 developed by Makerbase that prevents losing steps. CPU is STM32F103C8T6 ARM 32-bit Cortex™-M3 CPU Core,72 MHz. Magnetic encoder is Allegro's A1333LLETR-T Contactless 0° to 360° angle sensor IC ,12bit .This Project open source hardware and code,support platformio build and upload firmware...
https://www.aliexpress.com/item/33032696338.html?spm=a2g0o.store_home.productList_8356958.pic_1
GNU General Public License v3.0
166 stars 70 forks source link

Debug Mode blocked #9

Open SirGioVan opened 4 years ago

SirGioVan commented 4 years ago

When send comand for debug stays always blocked and not allowed target via J-flash

VIDEO https://youtu.be/f8w820voKkI

some one know how get out from debug mode ?

mks-viva commented 4 years ago

You can press reset button

dzid26 commented 4 years ago

In the video you are showing Servo42a This repo is Servo42b which is STM32 based module.