search

makerbase-mks / MKS-SGEN_L-V2

MKS SGEN_L V2.0 is powerful 32-bit 3D printer control board. The CPU is LPC1769 120MHZ, SGEN_L V2 hardware Integrated 4KB EEPROM, 5AXIS and dual Z interface, has 2 way FANs and Dc12/24V out interface, support TMC UART and SPI mode...
https://www.aliexpress.com/item/4001283346331.html?spm=a2g0o.store_home.slider_165457030.0
GNU General Public License v3.0
71 stars 28 forks source link

Firmware crash dragging change value bar #33

Closed cizquierdof closed 3 years ago

cizquierdof commented 3 years ago

SGEN L V2 with marlin 2 bugfix mks TS35 TMC2209 and COLOR Marlin UI. Example with hotend temperature selection active if I drag de bar with the touch too quickly, screen goes black and it must reste or switch off the printer

mks-viva commented 3 years ago

You can use the latest version marlin bugfix: https://github.com/MarlinFirmware/Marlin/tree/bugfix-2.0.x I will update MKS SGEN_L V2 path firmware

mks-viva commented 3 years ago

Hi! If have not response, i will close this issues temporarily.

tinyOtter commented 3 years ago

Hello, Im having the same issue. when dragging the bar or turning the encoder knob ion TS35 there is a random reset. compiled in following versions: 'Marlin-2.0.7.2', 'Marlin-2.0 Bugfix', 'Marlin-2.0.7', 'Marlin-2.0.6' and Marlin-2.x' [Basically the 2.() versions]. All of the versions have the same issue of random resets. at first i found i had a faulty encoder which was replaced quickly to a new one, BUT the issue is not gone. Additionally, from the troubleshooting i moticed that only if 'Exp2' is connected the issue returns.

Im a total newbie in this, if need more info please ask.