search

makerbase-mks / MKS-SGEN_L-V2

MKS SGEN_L V2.0 is powerful 32-bit 3D printer control board. The CPU is LPC1769 120MHZ, SGEN_L V2 hardware Integrated 4KB EEPROM, 5AXIS and dual Z interface, has 2 way FANs and Dc12/24V out interface, support TMC UART and SPI mode...
https://www.aliexpress.com/item/4001283346331.html?spm=a2g0o.store_home.slider_165457030.0
GNU General Public License v3.0
71 stars 28 forks source link

Babystepping using TFT 3.5 causes hang #44

Open V3nn3tj3 opened 3 years ago

V3nn3tj3 commented 3 years ago

I recently upgraded my old Makerbase to the Sgen 2. When using babystepping in the print menu on the TFT3.5 the printer stalls or hangs for a little while. It does not keep printing.

This doesn't work as the filament keeps running out.

Am i doing something wrong that could cause the printer to hang?

mks-viva commented 3 years ago

Hi，I want to know，if you have not printing. The baby stepping function is ok?

V3nn3tj3 commented 3 years ago

I can't see the babystepping when not printing. I mapped the MORE buttons to "M290 Z", and that is working. Babystepping does work, it is just when opening the babystepping provided on the TFT3.5 that the SGEN board crashes.

mks-viva commented 3 years ago

So，we need check Marlin firmware settings

V3nn3tj3 commented 3 years ago

Marlin firmware is ok, babystepping works with custom buttons. Only not when using separate babystepping menu from the TFT screen.

Magiquall commented 3 years ago

Hello,

Did you find a solution ? I am in the same case and it does not work as soon as we open the babystepp view

Magiquall commented 3 years ago

Hello, in fact it's not just the BabyStepp that crashes the card, it's as soon as I make a print then in the options menu, and immediately after entering into a menu babystepp, fan or other, the printer crashes. We really feel alone with these issues, Makerbase, thank you for helping us.