search

makerbase-mks / MKS-SKIPR

MKS SKIPR is an all-in-one board launched by Makerbase for running Klipper. It integrates the RK3328 SOC running the Klipper host and the STM32F407VET6 MCU responsible for executing specific machine actions. It meets the use of most 3D printers.
GNU General Public License v3.0
88 stars 14 forks source link

Can't MCU connection dfu mode, MCU USB not working. #19

Open pure100kim opened 1 year ago

pure100kim commented 1 year ago

I connected usb to mcu type-c port. and then pressed the boot0 switch and turned on the power button, but the dfu usb is not recognized at all. It is not recognized as STM32CUBE. Not even ST-LINK.

MKS-hosiey commented 1 year ago

Is your data cable connected? There are two type_c interfaces on the motherboard, you need to connect to the MCU interface

pure100kim commented 1 year ago

Is your data cable connected? There are two type_c interfaces on the motherboard, you need to connect to the MCU interface

Of course. I used data cable including your acc in the box. And also used cell phone data cable.