search

makerbase-mks / MKS-TFT

MKS TFT touch screen includes TFT24/28/32/35/70, which can be connected to the motherboard for control via AUX-1. Support Simplified Chinese, Traditional Chinese, English, Russian, Spanish and more than 5 languages, and support online language switching ...
https://www.aliexpress.com/store/group/Smart-Display/1047297_502266038.html?spm=2114.12010612.pcShopHead_8325768.1_2
341 stars 192 forks source link

Rotation screen #222

Open alec220 opened 6 years ago

alec220 commented 6 years ago

I cannot find in the config file TFT7.0 line

Screen rotation 180 °(0:disable,1:enable)

cfg_screen_overturn_180:1

Is it mean I cannot rotation screen?!!

makerbase-mks commented 5 years ago

What is version of your firware. You can try it again with below configuration: cfg_screen_overturn_180:0xEE

alec220 commented 5 years ago

Hi! First I used 1.0.1, but after I return to 1.0.0 becouse 1.0.1 some times "freeze" . I tried to add this line, but without " 0xEE " it doesnt work. If you did new firmware, I try it, but when I come back home. It will be at the next week - this week I'm in China, GZ.

Отправлено из Mail.Ru для Android понедельник, 19 ноября 2018г., 09:58 +08:00 от makerbase notifications@github.com :

What is version of your firware. You can try it again with below configuration: cfg_screen_overturn_180:0xEE — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub , or mute the thread .

makerbase-mks commented 5 years ago

The rotation screen function of TFT70 has been modified. It will be released soon. If you are in a hurry, you can leave your email address and I can send you a copy directly when you release it.

alec220 commented 5 years ago

This is my email. Alec220@list.ru & info@alekmaker.ru it will be good for me.

Отправлено из Mail.Ru для Android вторник, 20 ноября 2018г., 09:59 +08:00 от makerbase notifications@github.com :

The rotation screen function of TFT70 has been modified. It will be released soon. If you are in a hurry, you can leave your email address and I can send you a copy directly when you release it. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub , or mute the thread .

alec220 commented 5 years ago

Hi! I came back to Russia, and can to test your new firmware. How I can use this rotation function? I must to add this line to config file?  I downloaded firmware from GitHub it looks same - config file dont have this line. You promise to send new version on my e-mail, I didnt recieve anything yet.

Понедельник, 19 ноября 2018, 4:58 +03:00 от makerbase notifications@github.com:

What is version of your firware. You can try it again with below configuration: cfg_screen_overturn_180:0xEE — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub , or mute the thread .

Алексей Киселёв alec220@list.ru www.alekmaker.ru +79058782073 whatsapp, viber Skype alec220 http://alec220.livejournal.com

makerbase-mks commented 5 years ago

We have sent it.

alec220 commented 5 years ago

Yes, now I recieved its, 謝謝 ))

Пятница, 30 ноября 2018, 9:42 +03:00 от makerbase notifications@github.com:

We have sent it. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub , or mute the thread .

Алексей Киселёв alec220@list.ru www.alekmaker.ru +79058782073 whatsapp, viber Skype alec220 http://alec220.livejournal.com

alec220 commented 5 years ago

Please translate to English the new config file, half lines I cannot to read - wrong simbols...

Пятница, 30 ноября 2018, 9:42 +03:00 от makerbase notifications@github.com:

We have sent it. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub , or mute the thread .

Алексей Киселёв alec220@list.ru www.alekmaker.ru +79058782073 whatsapp, viber Skype alec220 http://alec220.livejournal.com

alec220 commented 5 years ago

Hi!

I tried your new firware.

  1. Return display is good, its works, done. 2 U disk doesn't works.  Display sees it if I plug U disk and after swich on power - only this way!  If I plug U disk when printer in power on, TFT70 or dont sees U disk ( don't any reaction) or immidiantly freeze...

Пятница, 30 ноября 2018, 9:42 +03:00 от makerbase notifications@github.com:

We have sent it. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub , or mute the thread .

Алексей Киселёв alec220@list.ru www.alekmaker.ru +79058782073 whatsapp, viber Skype alec220 http://alec220.livejournal.com

makerbase-mks commented 5 years ago

We have sent en config file. The U disk work normally need selected "USB" int the TFT "FileSys" interface.If you do this already and U disk not work, you can try to replace the U disk.

alec220 commented 5 years ago

Hi.

  I Tested your new firmware  - Display rotated, OK. U disk - a little bit better - now I can see U disk if it was connected before  power swich on. If I plug it when printer is on - its doesnt see U disk. And main problem is: If I plugged I disk before printer on, had seen files on the disk, I can start printing. But it usualy stops about 40-60% printng was done - it just freeze, becouse it lost the U disk- nozzle in model, temperature is hight (worked T)  but doesnt move - I can only push stop and cancel printing

Пятница, 7 декабря 2018, 10:45 +03:00 от makerbase notifications@github.com:

We have sent en config file. The U disk work normally need selected "USB" int the TFT "FileSys" interface.If you do this already and U disk not work, you can try to replace the U disk. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub , or mute the thread .

Алексей Киселёв alec220@list.ru www.alekmaker.ru +79058782073 whatsapp, viber Skype alec220 http://alec220.livejournal.com

alec220 commented 5 years ago

Now I tried to switch to SD card - it doesnt work absolutly! It sees SD card, sees files, but when I try to start to print - Display is freeze absolutly - I can only unplug power socket! Never more I'll buy your boards, I think I have to write about my problem in our 3D forums.... To talk all designers of 3d printers, how I tried 3 month to make new printer with your "New super boards"! 

Пятница, 7 декабря 2018, 10:45 +03:00 от makerbase notifications@github.com:

We have sent en config file. The U disk work normally need selected "USB" int the TFT "FileSys" interface.If you do this already and U disk not work, you can try to replace the U disk. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub , or mute the thread .

Алексей Киселёв alec220@list.ru www.alekmaker.ru +79058782073 whatsapp, viber Skype alec220 http://alec220.livejournal.com