search

makerbase-mks / MKS-TinyBee

MKS TinyBee is a mainboard for 3d printing, based on ESP32 module
GNU General Public License v3.0
123 stars 117 forks source link

MKS TinyBEE AnyCubic Kossel Linear Plus Marlin 2.0.9.2 Bug LayerShift #26

Open flishy2532 opened 2 years ago

flishy2532 commented 2 years ago

any one can help am use mks tinybee on kossel linear plus tmc2209 x4 am test all config in Marlin 2.0.9.2 have bug layershift it jump when print long 15cm + layer have shift any one can help fix this am try test close all command S_curve Breze_support change jerk it not help

MKS-hosiey commented 2 years ago

Layer shift? It may be caused by the motor heating, the motor is not very hot? What is the rated current of the motor? Have you changed the drive current?

flishy2532 commented 2 years ago

am change current drive to 0.8a x3 and 0.6a x1 motor is cool not hot

รับ Outlook สำหรับ Androidhttps://aka.ms/AAb9ysg

From: MKS-hosiey @.> Sent: Thursday, May 5, 2022 3:28:49 PM To: makerbase-mks/MKS-TinyBee @.> Cc: flishy2532 @.>; Author @.> Subject: Re: [makerbase-mks/MKS-TinyBee] MKS TinyBEE AnyCubic Kossel Linear Plus Marlin 2.0.9.2 Bug LayerShift (Issue #26)

Layer shift? It may be caused by the motor heating, the motor is not very hot? What is the rated current of the motor? Have you changed the drive current?

— Reply to this email directly, view it on GitHubhttps://github.com/makerbase-mks/MKS-TinyBee/issues/26#issuecomment-1118296828, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AOWTQPRL542V7VJGPO75RWDVIOBEDANCNFSM5VC3AXGA. You are receiving this because you authored the thread.Message ID: @.***>

flishy2532 commented 2 years ago

รับ Outlook สำหรับ Androidhttps://aka.ms/AAb9ysg

From: MKS-hosiey @.> Sent: Thursday, May 5, 2022 3:28:49 PM To: makerbase-mks/MKS-TinyBee @.> Cc: flishy2532 @.>; Author @.> Subject: Re: [makerbase-mks/MKS-TinyBee] MKS TinyBEE AnyCubic Kossel Linear Plus Marlin 2.0.9.2 Bug LayerShift (Issue #26)

Layer shift? It may be caused by the motor heating, the motor is not very hot? What is the rated current of the motor? Have you changed the drive current?

— Reply to this email directly, view it on GitHubhttps://github.com/makerbase-mks/MKS-TinyBee/issues/26#issuecomment-1118296828, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AOWTQPRL542V7VJGPO75RWDVIOBEDANCNFSM5VC3AXGA. You are receiving this because you authored the thread.Message ID: @.***>

MKS-hosiey commented 2 years ago

Are you using the firmware from our github?

flishy2532 commented 2 years ago

yes this firmware is your our github

รับ Outlook สำหรับ Androidhttps://aka.ms/AAb9ysg

From: MKS-hosiey @.> Sent: Thursday, May 5, 2022 3:37:12 PM To: makerbase-mks/MKS-TinyBee @.> Cc: flishy2532 @.>; Author @.> Subject: Re: [makerbase-mks/MKS-TinyBee] MKS TinyBEE AnyCubic Kossel Linear Plus Marlin 2.0.9.2 Bug LayerShift (Issue #26)

Are you using the firmware from our github?

— Reply to this email directly, view it on GitHubhttps://github.com/makerbase-mks/MKS-TinyBee/issues/26#issuecomment-1118305185, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AOWTQPRTLEWUCMJAOU6PGGDVIOCDRANCNFSM5VC3AXGA. You are receiving this because you authored the thread.Message ID: @.***>

MKS-hosiey commented 2 years ago

Is it normal to go home, move, etc.? Every print is shifted at the same position?

flishy2532 commented 2 years ago

Is it normal to go home, move, etc.? Every print is shifted at the same position?

it normal go to home but when am test print high position the layer is shifted any one can help fix this problem layer shift on Kossel Linear Plus

20220505_182626.jpg

20220505_182612.jpg

20220505_182601.jpg

20220505_182549.jpg

20220505_182543.jpg

flishy2532 commented 2 years ago

it normal go home but when test print high position the Layer is shifted Any One Help Fix

MKS-hosiey commented 2 years ago

Can you post your config file and Gcode?

flishy2532 commented 2 years ago

yesss sec

รับ Outlook สำหรับ Androidhttps://aka.ms/AAb9ysg

From: MKS-hosiey @.> Sent: Friday, May 6, 2022 9:45:26 AM To: makerbase-mks/MKS-TinyBee @.> Cc: flishy2532 @.>; Author @.> Subject: Re: [makerbase-mks/MKS-TinyBee] MKS TinyBEE AnyCubic Kossel Linear Plus Marlin 2.0.9.2 Bug LayerShift (Issue #26)

Can you post your config file and Gcode?

— Reply to this email directly, view it on GitHubhttps://github.com/makerbase-mks/MKS-TinyBee/issues/26#issuecomment-1119212034, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AOWTQPTINEEOQNDBTLGG4X3VISBUNANCNFSM5VC3AXGA. You are receiving this because you authored the thread.Message ID: @.***>

flishy2532 commented 2 years ago

Here This My G-Code And Config G Code and Config.zip

flishy2532 commented 2 years ago

any one can help fix LayerShift???

Rainer69 commented 2 years ago

MKS TinyBee is the worst board I have ever bought. After many attempts and unsuccessful solutions, I scrapped the board. I am now using my SKR 1.4 again on my BLV MGN Cube. at least that works

flishy2532 commented 2 years ago

MKS TinyBee is the worst board I have ever bought. After many attempts and unsuccessful solutions, I scrapped the board. I am now using my SKR 1.4 again on my BLV MGN Cube. at least that works

ah it new board i think wait bug fix

LouisR21 commented 2 years ago

It may be new, but it is a controller board, at least its basic function of completing a print should be 100%. Or announce in your videos that the board is not working properly. I've tried everything to make it work fine, motor voltage, cooling, don't use hot bed, use other DVR drivers, don't use tft, disable expert functions, I always get the error . It is a prejudice for people who want to start the world of printing with this board, for example my case was like this, I built my own printer from scratch to start thank god I also bought a Ramps with Arduino Mega. I had the same experience with the tft mks 35 v1, a product with flaws, and not enough support. In the end I managed to use it comfortably with Firmware from bigtreetech.
I think that we are already enough users that we present these bugs, and that there should already be some concrete answer on how to solve this issue. I have two tiny boards for decoration Unfortunately, I don't live in Venezuela. Internet purchases take up to 6 months to reach your hands.

flishy2532 commented 2 years ago

am delete this bug FI command lol many it have 300+ line omg

20220506_200423.jpg

![Uploading w2{174cc8c} (80d0c903-42e4-4c62-9643-bbc84bc80f61 id=0x7f0a03bd tag=BaseCommentFragment) …]()

MKS-hosiey commented 2 years ago

Hello, is the configuration you sent me the one you are using on your machine? The probe pin conflicts with the z_max pin and it cannot go home. The fan pin in the advanced configuration file also conflicts with the o in the pin.h file, which causes the screen to restart continuously. Are you sure the configuration you sent me is exactly the same as the one used? of?

flishy2532 commented 2 years ago

yes am change probe pin in pin config.h to 35 am see mks tiny bee manual use this pin for mt_det am use this port for probe v2 use micro switch for calibrate menu am mapper new ah delta machine is use max pin for home switch it normal i dont know what problem why it layer shift when am print around 70-80% on cura

รับ Outlook สำหรับ Androidhttps://aka.ms/AAb9ysg

From: MKS-hosiey @.> Sent: Monday, May 9, 2022 2:29:02 PM To: makerbase-mks/MKS-TinyBee @.> Cc: flishy2532 @.>; Author @.> Subject: Re: [makerbase-mks/MKS-TinyBee] MKS TinyBEE AnyCubic Kossel Linear Plus Marlin 2.0.9.2 Bug LayerShift (Issue #26)

Hello, is the configuration you sent me the one you are using on your machine? The probe pin conflicts with the z_max pin and it cannot go home. The fan pin in the advanced configuration file also conflicts with the o in the pin.h file, which causes the screen to restart continuously. Are you sure the configuration you sent me is exactly the same as the one used? of?

— Reply to this email directly, view it on GitHubhttps://github.com/makerbase-mks/MKS-TinyBee/issues/26#issuecomment-1120743419, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AOWTQPT3AOHDAZSA2YV5XFDVJC5D5ANCNFSM5VC3AXGA. You are receiving this because you authored the thread.Message ID: @.***>

MKS-hosiey commented 2 years ago

I'm verifying this problem in the print test, your model is very slow to print, it takes some time to print to 75%

MKS-hosiey commented 2 years ago

How many nozzle holes does your machine have? My machine is 0.4, printing your model will extrude too much

flishy2532 commented 2 years ago

yes it 0.4 nozzle am use Fysetc extruder it have gear hahaha

รับ Outlook สำหรับ Androidhttps://aka.ms/AAb9ysg

From: MKS-hosiey @.> Sent: Monday, May 9, 2022 4:51:52 PM To: makerbase-mks/MKS-TinyBee @.> Cc: flishy2532 @.>; Author @.> Subject: Re: [makerbase-mks/MKS-TinyBee] MKS TinyBEE AnyCubic Kossel Linear Plus Marlin 2.0.9.2 Bug LayerShift (Issue #26)

How many nozzle holes does your machine have? My machine is 0.4, printing your model will extrude too much

— Reply to this email directly, view it on GitHubhttps://github.com/makerbase-mks/MKS-TinyBee/issues/26#issuecomment-1120889294, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AOWTQPTNWKLXEXC567EBIVTVJDN3RANCNFSM5VC3AXGA. You are receiving this because you authored the thread.Message ID: @.***>

MKS-hosiey commented 2 years ago

Strange, print with your gcode file, the extrusion will be more extra, it looks rough, the parameters of my machine are ok

flishy2532 commented 2 years ago

you can drop rate in step/mm on machine controler my extruder use 450 mm normal is 96

รับ Outlook สำหรับ Androidhttps://aka.ms/AAb9ysg

From: MKS-hosiey @.> Sent: Monday, May 9, 2022 4:58:52 PM To: makerbase-mks/MKS-TinyBee @.> Cc: flishy2532 @.>; Author @.> Subject: Re: [makerbase-mks/MKS-TinyBee] MKS TinyBEE AnyCubic Kossel Linear Plus Marlin 2.0.9.2 Bug LayerShift (Issue #26)

Strange, print with your gcode file, the extrusion will be more extra, it looks rough, the parameters of my machine are ok

— Reply to this email directly, view it on GitHubhttps://github.com/makerbase-mks/MKS-TinyBee/issues/26#issuecomment-1120894860, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AOWTQPSPA7W3MJT4IT6XOY3VJDOVZANCNFSM5VC3AXGA. You are receiving this because you authored the thread.Message ID: @.***>

MKS-hosiey commented 2 years ago

![Uploading 31.jpg…]()

MKS-hosiey commented 2 years ago

I used your configuration file to print, there is no layer shift problem, you can print my file to test

flishy2532 commented 2 years ago

Why am use my config have layer shift @_@ what problem on this am use mks tmc2209 x4 v1.0 Can you help me fix this problem? What am miss. ?

Sent from Mailhttps://go.microsoft.com/fwlink/?LinkId=550986 for Windows

From: MKS-hosiey @.> Sent: Wednesday, May 11, 2022 9:05:54 AM To: makerbase-mks/MKS-TinyBee @.> Cc: flishy2532 @.>; Author @.> Subject: Re: [makerbase-mks/MKS-TinyBee] MKS TinyBEE AnyCubic Kossel Linear Plus Marlin 2.0.9.2 Bug LayerShift (Issue #26)

I used your configuration file to print, there is no layer shift problem, you can print my file to test

— Reply to this email directly, view it on GitHubhttps://github.com/makerbase-mks/MKS-TinyBee/issues/26#issuecomment-1123098556, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AOWTQPTODQYS3LGMBDPEDR3VJMIYFANCNFSM5VC3AXGA. You are receiving this because you authored the thread.Message ID: @.***>

YoshiAye commented 2 years ago

Why am use my config have layer shift @_@ what problem on this am use mks tmc2209 x4 v1.0 Can you help me fix this problem? What am miss. ? Sent from Mailhttps://go.microsoft.com/fwlink/?LinkId=550986 for Windows … ____ From: MKS-hosiey @.> Sent: Wednesday, May 11, 2022 9:05:54 AM To: makerbase-mks/MKS-TinyBee @.> Cc: flishy2532 @.>; Author @.> Subject: Re: [makerbase-mks/MKS-TinyBee] MKS TinyBEE AnyCubic Kossel Linear Plus Marlin 2.0.9.2 Bug LayerShift (Issue #26) I used your configuration file to print, there is no layer shift problem, you can print my file to test — Reply to this email directly, view it on GitHub<#26 (comment)>, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AOWTQPTODQYS3LGMBDPEDR3VJMIYFANCNFSM5VC3AXGA. You are receiving this because you authored the thread.Message ID: @.***>

Your acceleration and current for axes the same as it was on stock board?

flishy2532 commented 2 years ago

yes am set it same

LouisR21 commented 2 years ago

@flishy2532 Your setting is at 1/16 ustep? Today I am going to recompile to test, in my case I had set it to 1/64 and the steps were also calculated at 1/64 . Due to another topic that I read, I am thinking that my problem can be eradicated from there since when interpolating it may be collapsing tinybee (everything is assuming). At first my faults were like yours after playing with speeds and current I came to that mess in the photo.

flishy2532 commented 2 years ago

yes i think it have some bug am alway layer shift how fix them

รับ Outlook สำหรับ Androidhttps://aka.ms/AAb9ysg

From: LouisR21 @.> Sent: Friday, May 13, 2022 8:06:02 PM To: makerbase-mks/MKS-TinyBee @.> Cc: flishy2532 @.>; Mention @.> Subject: Re: [makerbase-mks/MKS-TinyBee] MKS TinyBEE AnyCubic Kossel Linear Plus Marlin 2.0.9.2 Bug LayerShift (Issue #26)

@flishy2532https://github.com/flishy2532 Your setting is at 1/16 ustep? Today I am going to recompile to test, in my case I had set it to 1/64 and the steps were also calculated at 1/64 . Due to another topic that I read, I am thinking that my problem can be eradicated from there since when interpolating it may be collapsing tinybee (everything is assuming). At first my faults were like yours after playing with speeds and current I came to that mess in the photo.

— Reply to this email directly, view it on GitHubhttps://github.com/makerbase-mks/MKS-TinyBee/issues/26#issuecomment-1126036520, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AOWTQPXSLT5PDHC6NBYI7PDVJZHTVANCNFSM5VC3AXGA. You are receiving this because you were mentioned.Message ID: @.***>

flishy2532 commented 2 years ago

now am fix this problem successful am test all function and found problem yey

20220522_173858.jpg

20220522_173911.jpg

20220522_174144.jpg

this fix

20220522_174232.jpg

20220522_174254.jpg

MKS TMC2209 v1.0

20220522_175047.jpg

20220522_175603.jpg

20220522_175647.jpg

20220522_174826.jpg

micro step set

20220522_175218.jpg

marlin 2.0.9.2

20220522_175745.jpg

sdcard

20220522_175802.jpg

20220522_175808.jpg

sdcard test20220522_175826.jpg

LCD MKS V 3.0 Support RBG Full Color

20220522_175831.jpg

20220522_175840.jpg

20220522_175845.jpg

20220522_175848.jpg

20220522_175853.jpg

am post this firmware fix soon 👨‍🔧😉

aleung commented 2 years ago

@flishy2532 How did you fix it?

flishy2532 commented 2 years ago

it not fix am try test am use marlin 2.1.x maybe problem in Idle Stepper Shutdown it #define DEFAUALT_STEPPER_DEACTIVE_TIME 60

am try set to 0 for No Timeout

am test when go 60 min pass it layershift 🤔

รับ Outlook สำหรับ Androidhttps://aka.ms/AAb9ysg

From: Leo Liang @.> Sent: Monday, June 27, 2022 12:04:49 AM To: makerbase-mks/MKS-TinyBee @.> Cc: flishy2532 @.>; Mention @.> Subject: Re: [makerbase-mks/MKS-TinyBee] MKS TinyBEE AnyCubic Kossel Linear Plus Marlin 2.0.9.2 Bug LayerShift (Issue #26)

@flishy2532https://github.com/flishy2532 How did you fix it?

— Reply to this email directly, view it on GitHubhttps://github.com/makerbase-mks/MKS-TinyBee/issues/26#issuecomment-1166589053, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AOWTQPQYZSIMUHE72437FVDVRCETDANCNFSM5VC3AXGA. You are receiving this because you were mentioned.Message ID: @.***>

flishy2532 commented 2 years ago

yes can bump up speed rate on cura or print speed on machine this model is canopy for rc plane glider am set slow because need high resolution and high detel

รับ Outlook สำหรับ Androidhttps://aka.ms/AAb9ysg

From: MKS-hosiey @.> Sent: Monday, May 9, 2022 3:09:06 PM To: makerbase-mks/MKS-TinyBee @.> Cc: flishy2532 @.>; Author @.> Subject: Re: [makerbase-mks/MKS-TinyBee] MKS TinyBEE AnyCubic Kossel Linear Plus Marlin 2.0.9.2 Bug LayerShift (Issue #26)

I'm verifying this problem in the print test, your model is very slow to print, it takes some time to print to 75%

— Reply to this email directly, view it on GitHubhttps://github.com/makerbase-mks/MKS-TinyBee/issues/26#issuecomment-1120780190, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AOWTQPT3XCUZS5TOFS7ZOALVJDB2FANCNFSM5VC3AXGA. You are receiving this because you authored the thread.Message ID: @.***>