search

makerbase-mks / MKS-TinyBee

MKS TinyBee is a mainboard for 3d printing, based on ESP32 module
GNU General Public License v3.0
124 stars 118 forks source link

unable to use RepRap 2004 display module #45

Closed HiIamChaitanya closed 2 years ago

jaymcd commented 1 year ago

How was this resolved?

HiIamChaitanya commented 1 year ago

I enabled other displays as well thus was having error

jaymcd commented 1 year ago

Ok it s sounds like there is some pin definition issues or non standard display/cable arrangement.Jay M McDonaldOn Dec 9, 2022, at 8:51 PM, Chaitanya @.***> wrote: I enabled other displays as well thus was having error

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>

HiIamChaitanya commented 1 year ago

yep, you have to comment other display

jaymcd commented 1 year ago

I have the right display identified in Marlin. That is not the issue,Jay M McDonaldOn Dec 9, 2022, at 9:30 PM, Chaitanya @.***> wrote:

yep , you have to comment other display

On Sat, Dec 10, 2022 at 8:57 AM jaymcd @.***> wrote:

Ok it s sounds like there is some pin definition issues or non standard

display/cable arrangement.Jay M McDonaldOn Dec 9, 2022, at 8:51 PM,

Chaitanya @.***> wrote:

I enabled other displays as well thus was having error

—Reply to this email directly, view it on GitHub, or unsubscribe.You are

receiving this because you commented.Message ID: @.***>

—

Reply to this email directly, view it on GitHub

https://github.com/makerbase-mks/MKS-TinyBee/issues/45#issuecomment-1345013705,

or unsubscribe

https://github.com/notifications/unsubscribe-auth/ARSFALGJJTCELRRE34V2QCLWMP2DHANCNFSM53IEMIPQ

.

You are receiving this because you modified the open/close state.Message

ID: @.***>

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: @.***>

HiIamChaitanya commented 1 year ago

then you might have missing lib or can you share their terminal logs / error

jaymcd commented 1 year ago

I received my MKS Mini 12864 V3 - it does not work with my Tiny Bee either. Defined in Marlin as the MKS Mini 12864 V3 but does not even light up.

Do I have a defective Tiny Bee board ?

Jay

From: "Chaitanya" @.> To: "makerbase-mks/MKS-TinyBee" @.> Cc: "Jay Mark McDonald" @.>, "Comment" @.> Sent: Saturday, December 10, 2022 5:14:01 PM Subject: Re: [makerbase-mks/MKS-TinyBee] unable to use RepRap 2004 display module (Issue #45)

then you might have missing lib or can you share their terminal logs / error

— Reply to this email directly, [ https://github.com/makerbase-mks/MKS-TinyBee/issues/45#issuecomment-1345405700 | view it on GitHub ] , or [ https://github.com/notifications/unsubscribe-auth/AOOQXWVWTKJBGGBOVUNBAVLWMUFDTANCNFSM53IEMIPQ | unsubscribe ] . You are receiving this because you commented. Message ID: @.***>