search

makerbase-mks / MKS-WIFI

MKS TFT WIFI and MKS ROBIN WIFI , share the same firmware. Support MKS Robin series board and MKS TFT series board, for cloud printing and LAN printer controling……
https://www.aliexpress.com/item/32816882694.html?spm=2114.12010615.8148356.1.7bebc9cfK4bWPy
94 stars 38 forks source link

Printer reboots random on MKS Robin Nano 1.2 when WIFI module connected #19

Open BaltasarParreira opened 3 years ago

BaltasarParreira commented 3 years ago

Hi, I'm having issues lately after I compiled this source and installed on the module. Any one facing same problems?

BaltasarParreira commented 3 years ago

Update: Just compile today the current Marlin 2.0 Bugfix Branch and the reboots disappear and it's stable.

Now the problem is printing from Cura using the MKS plugin the printer becomes like crazy moving all around here and there in all X, Y and Z but nothing really prints in the end. So no normal operation.

2º Update: The crazy printing problem is everywhere, even normal printing from SD card does the same, so I conclude that this version is no good and apart fixing the rebooting problem can't be used for printing anything.

saya812 commented 3 years ago

Hi! Same problem - printer reboots when Cura connect to wifi. So if you start printer when cura is off - printer works. When you open cura on PC, cura write "printer connected" and printer reboots. If you start printer when cura is already opened on PC, printer reboots immediately.

foxlg commented 3 years ago

Hello. I have the same problem as @saya812 (Cura 4.9.1 / 4.9.0). It is fine only with the official FW from the TwoTrees website, but their firmware has other problems and cannot be used :/