search

makerbase-mks / MKS-WIFI

MKS TFT WIFI and MKS ROBIN WIFI , share the same firmware. Support MKS Robin series board and MKS TFT series board, for cloud printing and LAN printer controling……
https://www.aliexpress.com/item/32816882694.html?spm=2114.12010615.8148356.1.7bebc9cfK4bWPy
93 stars 38 forks source link

About ESP3D ... #24

Open themacboy opened 3 years ago

themacboy commented 3 years ago

On the readmewhat means "the interface needs to be transferred to the AUX-1."

Compatibility with esp3d ?

Esp3d is a well known wifi project in 3d printing , too. If you are using MKS Robin series or MKS TFT series, mks wifi firmware can make the transfer speed up to 100KBytes/s. If you are using other 2560 series board, Esp3d firmware is more suitable. Esp3d firmware also can runs on MKS WIFI hardware, but, the interface needs to be transferred to the AUX-1.
AdamBear commented 3 years ago

same question

iNDeX999 commented 3 years ago

same question too

BerranRemzi commented 2 years ago

This tutorial was useful for me Using_Web_Interface_or_SD_to_upload

ImmortalTeknik commented 1 year ago

Same question too... In my case, loading the webui from the browser page is working but I still cant connect with the printer, but this is another topic.