search

makerbase-mks / MKS-WIFI

MKS TFT WIFI and MKS ROBIN WIFI , share the same firmware. Support MKS Robin series board and MKS TFT series board, for cloud printing and LAN printer controling……
https://www.aliexpress.com/item/32816882694.html?spm=2114.12010615.8148356.1.7bebc9cfK4bWPy
94 stars 38 forks source link

MKS TFT WIFI with MKS-TFT2.8 #36

Open APAKGRUP opened 11 months ago

APAKGRUP commented 11 months ago

Hello, I got Makerbase MKS TFT WIFI module to connect it with my screen MKS-TFT2.8. IMG20231108131623 IMG20231108131631 everything is done successfully as you can see. However, I could not reach this IP address either from a web browser or from Cura. Any help, please? Thanks

Rincewind08 commented 8 months ago

Your issue is that your wifi module is in ACCESS POINT mode, meaning it is hosting the network itself. If you have A Laptop/Desktop/SBC, or even just a common cell phone would be capable, You should join the network at the listed SSID on the screen, which appears to be an open network? And from there navigate to the IP liSted on the screen, and from there you can change the settings and make your wifi module go in to CLIENT mode. Supply your network's WiFi credentials and your set up.