search

makerbase-mks / MKS-WIFI

MKS TFT WIFI and MKS ROBIN WIFI , share the same firmware. Support MKS Robin series board and MKS TFT series board, for cloud printing and LAN printer controling……
https://www.aliexpress.com/item/32816882694.html?spm=2114.12010615.8148356.1.7bebc9cfK4bWPy
94 stars 38 forks source link

Passphrase length limited to 18 chars #9

Open mikroled opened 4 years ago

mikroled commented 4 years ago

In germany the common routers Fritz!Box are equiped with a predefined 20 characters WiFi Key (20 numbers). The gui of the Ronbin Nano/MKS-Wifi only excepts up to 18 characters.

Cloud you please extend the length of the accepted passphrase in the gui up to minimal 20 characters?

makerbase-mks commented 4 years ago

MKS has limit display to 18 characters, but you can use it normal.

mikroled commented 4 years ago

The gui only accepts 18 characters and is not useable for configuration WiFi settings where passwords with more characters are used. You need to configure the WiFi settings in the board configuration file robin_nano35_cfg.txt to get it working.

khaoskosmos commented 3 years ago

This is a problem elsewhere as well, many default passwords are over 17 characters... big problem. The config text file only works on non-Marlin firmware (ie. OLD), correct?