search

makerbase-mks / Mks-Robin-Nano-Marlin2.0-Firmware

The firmware of Mks Robin Nano, based on Marlin-2.0.x, adding the color GUI.
GNU General Public License v3.0
265 stars 286 forks source link

Pause and resume #137

Open WashingtonJunior opened 3 years ago

WashingtonJunior commented 3 years ago

The extruder won't move forward, it just retracts, after hit pause and then resume. It already happened twice here with me, while doing a multi-color print. But, it won't occur if you do the pause and resume on the first layer (yes, I tested) at least. It only happens after some time printing. I made a video showing, if it's needed.

Thanks!

mks-viva commented 3 years ago

Hi! You can provide it to me.

WashingtonJunior commented 3 years ago

This one is after several layers (you'll see that the extruder won't move forward, only retracts): https://youtu.be/E5g7o1HHf7Y And this one is on first layer (when it continues as usual): https://youtu.be/gW3MP46AHrI

mks-viva commented 3 years ago

Very similar to this issues: https://github.com/makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware/issues/133

WashingtonJunior commented 3 years ago

Very similar to this issues: #133

No, in this case when we pause and resume it continues, but without extruding. The other issue is that the printing does end, but it shows on display like it's still going on.

mks-L commented 3 years ago

Can you provide the Configuration Files to me?

WashingtonJunior commented 3 years ago

Can you provide the Configuration Files to me?

Sure, here they are. Thanks!

Configuration-files.zip

mks-L commented 3 years ago

May I ask which version of the file you used? This problem does not occur when I use the new file.

mks-L commented 3 years ago

You can use the latest files to update and see if the same problem occurs.

misiek271 commented 3 years ago

Iv got robin v2 and the same is in my printer

n9jcv commented 2 years ago

Yes, I have this same issue, Robin Nano V2. Pause, then resume and extruder no longer extrudes.

n9jcv commented 2 years ago

MKS Robin Nano V2 and MKS_TS35_V2_0 I tested with Marlin 2.0.9.2 COMMIT 4E2443A476 And the bug is still there. Can someone please fix this ? config files attached

configs.zip

I was on second layer, click pause on the lcd. It stopped printing and moved away. I then clicked resume after a minute, the extruder motor made a bunch of noise for about 10 seconds, and then the extruder motor no longer turns. xyz continue to move as if it were printing.

rjhubner commented 2 years ago

Same is happening to me on pause or even on end of filament that calls the pause routine. I have tested a couple of Robin Nano V2 and same problem. My Marlin version 2.00.06

freeman02 commented 2 years ago

Yes, I have this same issue, Robin Nano V1.2. Pause, then resume and extruder invert Marlin version 2.0.9.2