makerbase-mks / Mks-Robin-Nano-Marlin2.0-Firmware

The firmware of Mks Robin Nano, based on Marlin-2.0.x, adding the color GUI.

GNU General Public License v3.0

258 stars 280 forks source link

MKS_WIFI_MODULE + ESP3D #261

Open iNDeX999 opened 3 years ago

iNDeX999 commented 3 years ago

Hi,

i have flashed ESP3D to my MKS WIFI (Firmware: https://github.com/makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware.git)

NANO V3 / TS35

define MOTHERBOARD BOARD_MKS_ROBIN_NANO_V3

define TFT_LVGL_UI

define MKS_WIFI_MODULE

ESP3D FW_VERSION "2.1.1.b10" with and without MKS_TFT_FEATURE compiled )

But i cannot connect to the printer in the ESP3D Gui

Did i misse something?

DvoraGames commented 3 years ago

Hi,

i have flashed ESP3D to my MKS WIFI (Firmware: https://github.com/makerbase-mks/Mks-Robin-Nano-Marlin2.0-Firmware.git)

NANO V3 / TS35

define MOTHERBOARD BOARD_MKS_ROBIN_NANO_V3

define TFT_LVGL_UI

define MKS_WIFI_MODULE

ESP3D FW_VERSION "2.1.1.b10" with and without MKS_TFT_FEATURE compiled )

But i cannot connect to the printer in the ESP3D Gui

Did i misse something?

esp 3.0 , not 2.1.1 https://github.com/luc-github/ESP3D/tree/3.0

iNDeX999 commented 3 years ago

Ok, connection works now. But... it´s more or less useless, thx MKS.
How can i use ESP3D as im used to from my fysetc e4. Use an ESP32 and connect it to power +RX/TX from the Wifi socket off the nano v3?

DvoraGames commented 3 years ago

Ok, connection works now. But... it´s more or less useless, thx MKS. How can i use ESP3D as im used to from my fysetc e4. Use an ESP32 and connect it to power +RX/TX from the Wifi socket off the nano v3?

ESP you can only use in web