search

makerbase-mks / RepRapFirmware-for-MKS-Boards

GNU General Public License v3.0
14 stars 10 forks source link

mks robin nano v3.1 and new bootloader. #8

Open Osettt opened 2 years ago

Osettt commented 2 years ago

Hello. At the moment there is a bootloader problem for the new board version v3.1. People who wanted to put RRF on their board, according to the instructions, flashed the bootloader. After flashing, the board goes into a permanent restart. In this regard, please upload the standard version for the bootloader and clarify in the instructions that the bootloader firmware is only suitable for version v3.0 and not for v3.x.

jaysuk commented 2 years ago

i would suggest don't even bother trying to run RRF on an MKS board. If you really want RRF, get an officially supported board https://teamgloomy.github.io/supported_boards.html (just not an LPC one)

Lino77 commented 2 years ago

RRF-3.4.0_1 for Nano V3 for new bootloader Nano_V3 3.4.0_1.zip

KosVas91 commented 2 years ago

RRF-3.4.0_1 for Nano V3 for new bootloader Nano_V3 3.4.0_1.zip

Hello @Lino77 ! Thank you very much for providing actual versions of RRF for Nano V3 board. MKS adverised RRF support on Nano V3 and never updated firmware since then and you are actually doing their job.

Lexering1988 commented 1 year ago

Come si fa ad installare questo bootloader?

zizipapa commented 1 year ago

Why is there no information anywhere about Robin Nano V3.2 and possible firmware?