search

makerbase-mks / SGEN_L

MKS SGEN_L is a powerful 32-bit 3D printer control board with LPC1768. Support Marlin2.0, Smoothieware. Support MKS LCD12864B/MINI12864/LCD2004/12864 and MKS TFT Touch Screens. The motherboard integrates SPI / UART interface and works with MKS TMC2130/TMC2208 V2.0/TMC2209. It can be used after plugged in. No soldering or flying lead is required ...
https://es.aliexpress.com/item/33036918120.html?spm=a2g0o.store_home.slider_165457030.3
GNU General Public License v3.0
87 stars 61 forks source link

Firmware #21

Closed christoels closed 3 years ago

christoels commented 4 years ago

Hi i cant find the firmware for this setup anywhere have a mks 1.0 controller board in my wanhao duplicator 5s mini printer. With the 3.2 tft screen. I dont know much about firmware and have been trying for a week now to get printer to work. Can anyone please please assist would like to use my printer

makerbase-mks commented 4 years ago

You use MKS SGEN_L + MKS TFT32 ? Can you send some image about board and tft32 connect and so on

christoels commented 4 years ago

Hi yes here is the stuff done on the machine the information i have:

MOTHERBOARD - MKS Gen-L 1.0 Controller Board

TOUCH SCREEN - MKS TFT 3.2 inch

POWER SUPPLY - 400W, 12V, 33A

WIFI - MKS ,TFT, Wifi Module

HEATED BED - MKS Mosfet Switch for Heated Bed, 25A

BUILD VOLUME – 205 x 305 x 185 mm

MAX PRINT SPEED – 300 mm/s

BOWDEN EXTRUDER - The new MK10

REMOVABLE GLASS – Bulldog clips

ENCLOSED PRINTER – Perspex doors

LAYER CAPABILITY – 0.02 - 0.3 mm

FILLAMENT CAPABILITIES – PLA, ABS, PETG and other common filaments

CONNECTIVITY – USB stick, USB cable, WIFI, MKS External SD Card Reader

NOZZEL – micro swizz 4.0mm

On Wed, 11 Mar 2020, 08:50 makerbase, notifications@github.com wrote:

You use MKS SGEN_L + MKS TFT32 ? Can you send some image about board and tft32 connect and so on

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/makerbase-mks/SGEN_L/issues/21?email_source=notifications&email_token=AOZJYXCSXVXGEU7WVDADDXTRG4YCJA5CNFSM4LFN64Y2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEOOLCDI#issuecomment-597471501, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOZJYXAWTXWETPCMGDWJZSTRG4YCJANCNFSM4LFN64YQ .

makerbase-mks commented 4 years ago

Hi! The first, you need upload firmware to MKS Gen_L V1.0 and set it: image The second, connect MKS TFT32 by AUX-1 interface and check temp by MKS TFT32 screen. If it can be detected normally, the communication with the motherboard is successful.

christoels commented 4 years ago

See i dont know how to do all this dont know anything about coding

On Thu, 12 Mar 2020, 04:55 makerbase, notifications@github.com wrote:

Hi! The first, you need upload firmware to MKS Gen_L V1.0 and set it: [image: image] https://user-images.githubusercontent.com/12979070/76482594-8aacdd00-644f-11ea-8c91-d026142a2efa.png The second, connect MKS TFT32 by AUX-1 interface and check temp by MKS TFT32 screen. If it can be detected normally, the communication with the motherboard is successful.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/makerbase-mks/SGEN_L/issues/21#issuecomment-597980840, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOZJYXC3YHY7Z73CPLVBCPDRHBFKJANCNFSM4LFN64YQ .

christoels commented 4 years ago

Also dont know which firmware

On Thu, 12 Mar 2020, 04:55 makerbase, notifications@github.com wrote:

Hi! The first, you need upload firmware to MKS Gen_L V1.0 and set it: [image: image] https://user-images.githubusercontent.com/12979070/76482594-8aacdd00-644f-11ea-8c91-d026142a2efa.png The second, connect MKS TFT32 by AUX-1 interface and check temp by MKS TFT32 screen. If it can be detected normally, the communication with the motherboard is successful.

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/makerbase-mks/SGEN_L/issues/21#issuecomment-597980840, or unsubscribe https://github.com/notifications/unsubscribe-auth/AOZJYXC3YHY7Z73CPLVBCPDRHBFKJANCNFSM4LFN64YQ .

makerbase-mks commented 4 years ago

There is firmware in the SGEN_L folder, you can download it and update it.