search

makerbase-mks / SGEN_L

MKS SGEN_L is a powerful 32-bit 3D printer control board with LPC1768. Support Marlin2.0, Smoothieware. Support MKS LCD12864B/MINI12864/LCD2004/12864 and MKS TFT Touch Screens. The motherboard integrates SPI / UART interface and works with MKS TMC2130/TMC2208 V2.0/TMC2209. It can be used after plugged in. No soldering or flying lead is required ...
https://es.aliexpress.com/item/33036918120.html?spm=a2g0o.store_home.slider_165457030.3
GNU General Public License v3.0
87 stars 61 forks source link

please help , the board does not show up on Arduino/Cura. #30

Closed paulc1218 closed 4 years ago

paulc1218 commented 4 years ago

Hi printers ;)

i have just received a printer which uses the MKS gen L , when i was trying to upgrade the firmware to marlin, my computer doesnt seems to recognise the printer , nothing is showing up on the Arduino ide nor on any slicers i use.

i have tried :

  1. using different cables,
  2. download 340 driver (not sure if i am using the right one)
  3. try to connect to a different printer (which works)
  4. disconnecting the TFT

am i missing something here ? any advise is appreciated.

thanks in advance

makerbase-mks commented 4 years ago

Hi!

  1. CH340 driver https://raw.githubusercontent.com/makerbase-mks/Software/master/CH340G_USB%20Driver/CH340G_USB%E9%A9%B1%E5%8A%A8.rar
  2. You need check you port and Baud rate is the same