Future request: USB 3.0 Support

makerbase-mks / SGEN_L

MKS SGEN_L is a powerful 32-bit 3D printer control board with LPC1768. Support Marlin2.0, Smoothieware. Support MKS LCD12864B/MINI12864/LCD2004/12864 and MKS TFT Touch Screens. The motherboard integrates SPI / UART interface and works with MKS TMC2130/TMC2208 V2.0/TMC2209. It can be used after plugged in. No soldering or flying lead is required ...

https://es.aliexpress.com/item/33036918120.html?spm=a2g0o.store_home.slider_165457030.3

GNU General Public License v3.0

87 stars 61 forks source link

Future request: USB 3.0 Support #6

Closed biocrypto730 closed 4 years ago

biocrypto730 commented 4 years ago

For next generation, (SGEN_L_2), please consider adding USB 3.0 support.

It will make it faster when sending 32-bit numbers over serial. It will allow you to use USB 3.0 webcams on same USB 3.0 controller. Less glitches, more stability. USB 3.0 is more simple than ethernet.

Ccleorina87 commented 4 years ago

NXP1768 have only USB 2.0 full-speed device/Host/OTG controller build-in... even STM32F407ZG Is limited to USB 2.0...