search

makermadecnc / makerverse

GNU General Public License v3.0
32 stars 13 forks source link

Original Maslow Alarm: 3 (Abort during cycle) #90

Open buck2825 opened 2 years ago

buck2825 commented 2 years ago

My original maslow works fine under webcontrol. In makerverse it calibrates and moves just fine. I get a few lines into my GCode and I get an Alarm: 3 (Abort during cycle) displays in the console, and a Gray box with "Abort during cycle Reset while in motion. Machine position is likely lost due to sudden halt. Re-homing is highly recommended."

rspeed commented 2 years ago

I'm having the same problem.

zaneclaes commented 2 years ago

Does this always happen on the same line of the file? If so, it is almost certainly a problem with the GCode. Does it happen with other files? Have you tried this exact file with WebControl?

buck2825 commented 2 years ago

yes same line every time. yes it happens with other files. It runs well in webcontrol. I switched to webcontrol to finish cutting the project.

The line it tripped on was a simple G01.

zaneclaes commented 2 years ago

Could you upload the file for me to test?

One idea is to try copy & pasting the GCode (line by line) into the console. If it happens there, too, we know it's a problem with the Makerverse sending code (as opposed to the file reader). Note that the current version of Makerverse is a fork of CNCjs... and if you search Google for "Alarm: 3" the very first result is an issue there, which may be related.

buck2825 commented 2 years ago

(Exported by FreeCAD) (Post Processor: PathScripts.post.grbl_G81_post) (Output Time:2021-12-16 14:56:31.177383) (begin preamble) G17 G90 G21 (begin operation: Job) (Path: Job) M1 G0 Z6.000 G0 X154.844 Y148.671 Z6.000 G0 X154.844 Y148.671 Z4.000 G1 X154.844 Y148.671 Z-1.117 F60.00 G1 X204.587 Y119.952 Z-1.117 F60.00 G2 X206.175 Y117.202 Z-1.117 I-1.587 J-2.750 K0.000 F60.00 G1 X206.175 Y-117.202 Z-1.117 F60.00 G2 X204.587 Y-119.952 Z-1.117 I-3.175 J0.000 K0.000 F60.00 G1 X1.587 Y-237.154 Z-1.117 F60.00 G2 X0.822 Y-237.471 Z-1.117 I-1.588 J2.750 K0.000 F60.00 G2 X-1.588 Y-237.154 Z-1.117 I-0.822 J3.067 K0.000 F60.00 G1 X-204.588 Y-119.952 Z-1.117 F60.00 G2 X-206.175 Y-117.202 Z-1.117 I1.587 J2.750 K0.000 F60.00 G1 X-206.175 Y117.202 Z-1.117 F60.00 G2 X-204.587 Y119.952 Z-1.117 I3.175 J-0.000 K0.000 F60.00 G1 X-1.588 Y237.154 Z-1.117 F60.00 G2 X1.587 Y237.154 Z-1.117 I1.588 J-2.750 K0.000 F60.00 G1 X154.844 Y148.671 Z-1.117 F60.00 G1 X154.844 Y148.671 Z-3.233 F60.00 G1 X204.587 Y119.952 Z-3.233 F60.00 G2 X206.175 Y117.202 Z-3.233 I-1.587 J-2.750 K0.000 F60.00 G1 X206.175 Y-117.202 Z-3.233 F60.00 G2 X204.587 Y-119.952 Z-3.233 I-3.175 J0.000 K0.000 F60.00 G1 X1.587 Y-237.154 Z-3.233 F60.00 G2 X0.822 Y-237.471 Z-3.233 I-1.588 J2.750 K0.000 F60.00 G2 X-1.588 Y-237.154 Z-3.233 I-0.822 J3.067 K0.000 F60.00 G1 X-204.588 Y-119.952 Z-3.233 F60.00 G2 X-206.175 Y-117.202 Z-3.233 I1.587 J2.750 K0.000 F60.00 G1 X-206.175 Y117.202 Z-3.233 F60.00 G2 X-204.587 Y119.952 Z-3.233 I3.175 J-0.000 K0.000 F60.00 G1 X-1.588 Y237.154 Z-3.233 F60.00 G2 X1.587 Y237.154 Z-3.233 I1.588 J-2.750 K0.000 F60.00 G1 X154.844 Y148.671 Z-3.233 F60.00 G1 X154.844 Y148.671 Z-5.350 F60.00 G1 X204.587 Y119.952 Z-5.350 F60.00 G2 X206.175 Y117.202 Z-5.350 I-1.587 J-2.750 K0.000 F60.00 G1 X206.175 Y-117.202 Z-5.350 F60.00 G2 X204.587 Y-119.952 Z-5.350 I-3.175 J0.000 K0.000 F60.00 G1 X1.587 Y-237.154 Z-5.350 F60.00 G2 X0.822 Y-237.471 Z-5.350 I-1.588 J2.750 K0.000 F60.00 G2 X-1.588 Y-237.154 Z-5.350 I-0.822 J3.067 K0.000 F60.00 G1 X-204.588 Y-119.952 Z-5.350 F60.00 G2 X-206.175 Y-117.202 Z-5.350 I1.587 J2.750 K0.000 F60.00 G1 X-206.175 Y117.202 Z-5.350 F60.00 G2 X-204.587 Y119.952 Z-5.350 I3.175 J-0.000 K0.000 F60.00 G1 X-1.588 Y237.154 Z-5.350 F60.00 G2 X1.587 Y237.154 Z-5.350 I1.588 J-2.750 K0.000 F60.00 G1 X154.844 Y148.671 Z-5.350 F60.00 G1 X154.844 Y148.671 Z-7.467 F60.00 G1 X204.587 Y119.952 Z-7.467 F60.00 G2 X206.175 Y117.202 Z-7.467 I-1.587 J-2.750 K0.000 F60.00 G1 X206.175 Y9.439 Z-7.467 F60.00 G1 X206.175 Y8.272 Z-6.300 F60.00 G1 X206.175 Y-8.272 Z-6.300 F60.00 G1 X206.175 Y-9.439 Z-7.467 F60.00 G1 X206.175 Y-117.202 Z-7.467 F60.00 G2 X204.587 Y-119.952 Z-7.467 I-3.175 J0.000 K0.000 F60.00 G1 X1.587 Y-237.154 Z-7.467 F60.00 G2 X0.822 Y-237.471 Z-7.467 I-1.588 J2.750 K0.000 F60.00 G2 X-1.588 Y-237.154 Z-7.467 I-0.822 J3.067 K0.000 F60.00 G1 X-94.913 Y-183.272 Z-7.467 F60.00 G1 X-95.924 Y-182.689 Z-6.300 F60.00 G1 X-110.251 Y-174.417 Z-6.300 F60.00 G1 X-111.262 Y-173.833 Z-7.467 F60.00 G1 X-204.588 Y-119.952 Z-7.467 F60.00 G2 X-206.175 Y-117.202 Z-7.467 I1.587 J2.750 K0.000 F60.00 G1 X-206.175 Y-9.439 Z-7.467 F60.00 G1 X-206.175 Y-8.272 Z-6.300 F60.00 G1 X-206.175 Y8.272 Z-6.300 F60.00 G1 X-206.175 Y9.439 Z-7.467 F60.00 G1 X-206.175 Y117.202 Z-7.467 F60.00 G2 X-204.587 Y119.952 Z-7.467 I3.175 J-0.000 K0.000 F60.00 G1 X-1.588 Y237.154 Z-7.467 F60.00 G2 X1.587 Y237.154 Z-7.467 I1.588 J-2.750 K0.000 F60.00 G1 X70.042 Y197.632 Z-7.467 F60.00 G1 X71.052 Y197.049 Z-6.300 F60.00 G1 X85.379 Y188.777 Z-6.300 F60.00 G1 X86.390 Y188.193 Z-7.467 F60.00 G1 X154.844 Y148.671 Z-7.467 F60.00 G1 X154.844 Y148.671 Z-9.583 F60.00 G1 X204.587 Y119.952 Z-9.583 F60.00 G2 X206.175 Y117.202 Z-9.583 I-1.587 J-2.750 K0.000 F60.00 G1 X206.175 Y11.555 Z-9.583 F60.00 G1 X206.175 Y8.272 Z-6.300 F60.00 G1 X206.175 Y-8.272 Z-6.300 F60.00 G1 X206.175 Y-11.555 Z-9.583 F60.00 G1 X206.175 Y-117.202 Z-9.583 F60.00 G2 X204.587 Y-119.952 Z-9.583 I-3.175 J0.000 K0.000 F60.00 G1 X1.587 Y-237.154 Z-9.583 F60.00 G2 X0.822 Y-237.471 Z-9.583 I-1.588 J2.750 K0.000 F60.00 G2 X-1.588 Y-237.154 Z-9.583 I-0.822 J3.067 K0.000 F60.00 G1 X-93.080 Y-184.330 Z-9.583 F60.00 G1 X-95.924 Y-182.689 Z-6.300 F60.00 G1 X-110.251 Y-174.417 Z-6.300 F60.00 G1 X-113.095 Y-172.775 Z-9.583 F60.00 G1 X-204.588 Y-119.952 Z-9.583 F60.00 G2 X-206.175 Y-117.202 Z-9.583 I1.587 J2.750 K0.000 F60.00 G1 X-206.175 Y-11.555 Z-9.583 F60.00 G1 X-206.175 Y-8.272 Z-6.300 F60.00 G1 X-206.175 Y8.272 Z-6.300 F60.00 G1 X-206.175 Y11.555 Z-9.583 F60.00 G1 X-206.175 Y117.202 Z-9.583 F60.00 G2 X-204.587 Y119.952 Z-9.583 I3.175 J-0.000 K0.000 F60.00 G1 X-1.588 Y237.154 Z-9.583 F60.00 G2 X1.587 Y237.154 Z-9.583 I1.588 J-2.750 K0.000 F60.00 G1 X68.209 Y198.690 Z-9.583 F60.00 G1 X71.052 Y197.049 Z-6.300 F60.00 G1 X85.379 Y188.777 Z-6.300 F60.00 G1 X88.223 Y187.135 Z-9.583 F60.00 G1 X154.844 Y148.671 Z-9.583 F60.00 G1 X154.844 Y148.671 Z-11.700 F60.00 G1 X204.587 Y119.952 Z-11.700 F60.00 G2 X206.175 Y117.202 Z-11.700 I-1.587 J-2.750 K0.000 F60.00 G1 X206.175 Y13.672 Z-11.700 F60.00 G1 X206.175 Y8.272 Z-6.300 F60.00 G1 X206.175 Y-8.272 Z-6.300 F60.00 G1 X206.175 Y-13.672 Z-11.700 F60.00 G1 X206.175 Y-117.202 Z-11.700 F60.00 G2 X204.587 Y-119.952 Z-11.700 I-3.175 J0.000 K0.000 F60.00 G1 X1.587 Y-237.154 Z-11.700 F60.00 G2 X0.822 Y-237.471 Z-11.700 I-1.588 J2.750 K0.000 F60.00 G2 X-1.588 Y-237.154 Z-11.700 I-0.822 J3.067 K0.000 F60.00 G1 X-91.247 Y-185.389 Z-11.700 F60.00 G1 X-95.924 Y-182.689 Z-6.300 F60.00 G1 X-110.251 Y-174.417 Z-6.300 F60.00 G1 X-114.928 Y-171.717 Z-11.700 F60.00 G1 X-204.588 Y-119.952 Z-11.700 F60.00 G2 X-206.175 Y-117.202 Z-11.700 I1.587 J2.750 K0.000 F60.00 G1 X-206.175 Y-13.672 Z-11.700 F60.00 G1 X-206.175 Y-8.272 Z-6.300 F60.00 G1 X-206.175 Y8.272 Z-6.300 F60.00 G1 X-206.175 Y13.672 Z-11.700 F60.00 G1 X-206.175 Y117.202 Z-11.700 F60.00 G2 X-204.587 Y119.952 Z-11.700 I3.175 J-0.000 K0.000 F60.00 G1 X-1.588 Y237.154 Z-11.700 F60.00 G2 X1.587 Y237.154 Z-11.700 I1.588 J-2.750 K0.000 F60.00 G1 X66.375 Y199.749 Z-11.700 F60.00 G1 X71.052 Y197.049 Z-6.300 F60.00 G1 X85.379 Y188.777 Z-6.300 F60.00 G1 X90.056 Y186.077 Z-11.700 F60.00 G1 X154.844 Y148.671 Z-11.700 F60.00 G1 X154.844 Y148.671 Z-13.600 F60.00 G1 X204.587 Y119.952 Z-13.600 F60.00 G2 X206.175 Y117.202 Z-13.600 I-1.587 J-2.750 K0.000 F60.00 G1 X206.175 Y15.572 Z-13.600 F60.00 G1 X206.175 Y8.272 Z-6.300 F60.00 G1 X206.175 Y-8.272 Z-6.300 F60.00 G1 X206.175 Y-15.572 Z-13.600 F60.00 G1 X206.175 Y-117.202 Z-13.600 F60.00 G2 X204.587 Y-119.952 Z-13.600 I-3.175 J0.000 K0.000 F60.00 G1 X1.587 Y-237.154 Z-13.600 F60.00 G2 X0.822 Y-237.471 Z-13.600 I-1.588 J2.750 K0.000 F60.00 G2 X-1.588 Y-237.154 Z-13.600 I-0.822 J3.067 K0.000 F60.00 G1 X-89.602 Y-186.339 Z-13.600 F60.00 G1 X-95.924 Y-182.689 Z-6.300 F60.00 G1 X-110.251 Y-174.417 Z-6.300 F60.00 G1 X-116.573 Y-170.767 Z-13.600 F60.00 G1 X-204.588 Y-119.952 Z-13.600 F60.00 G2 X-206.175 Y-117.202 Z-13.600 I1.587 J2.750 K0.000 F60.00 G1 X-206.175 Y-15.572 Z-13.600 F60.00 G1 X-206.175 Y-8.272 Z-6.300 F60.00 G1 X-206.175 Y8.272 Z-6.300 F60.00 G1 X-206.175 Y15.572 Z-13.600 F60.00 G1 X-206.175 Y117.202 Z-13.600 F60.00 G2 X-204.587 Y119.952 Z-13.600 I3.175 J-0.000 K0.000 F60.00 G1 X-1.588 Y237.154 Z-13.600 F60.00 G2 X1.587 Y237.154 Z-13.600 I1.588 J-2.750 K0.000 F60.00 G1 X64.730 Y200.699 Z-13.600 F60.00 G1 X71.052 Y197.049 Z-6.300 F60.00 G1 X85.379 Y188.777 Z-6.300 F60.00 G1 X91.701 Y185.127 Z-13.600 F60.00 G1 X154.844 Y148.671 Z-13.600 F60.00 G0 X154.844 Y148.671 Z6.000 (finish operation: Job) (begin postamble) M5 G17 G90 M2

It might very well be related to that issue. I have not tried the cut and paste troubleshooting step. I need to get a second SD card for the raspberry pi. I have flashed it to use webcontrol at the moment.

rspeed commented 2 years ago

Looks like Markdown formatting clobbered the newlines.

rspeed commented 2 years ago

Oh, and I should note that I'm also getting the error on innocuous lines (including G1s), though I'm using Fusion 360 to generate it. The sled often does a small "wiggle" when it occurs, like the motors are drunk.

zaneclaes commented 2 years ago

@rspeed you can use https://gist.github.com to paste & share files :)

The sled often does a small "wiggle" when it occurs, like the motors are drunk.

hahah, interesting. Just to be sure, are you using the Maslow post-processor with Fusion360?

rspeed commented 2 years ago

@rspeed you can use https://gist.github.com to paste & share files :)

Oh, I meant the file that @buck2825 posted. I'll add my own gcode in a little bit when I have access to to the computer it's stored on.

hahah, interesting. Just to be sure, are you using the Maslow post-processor with Fusion360?

Yup. I've also tried the GRBL post-processor with similar results.

rspeed commented 2 years ago

Here's what the console reads:

X-10.505 Y14.972 I-26.769 J-20.735 ALARM:3 (Abort during cycle) position loaded at: -11.73 17.90

The line where it stopped.

buck2825 commented 2 years ago

i copy and pasted the code and absolutely nothing happened.
PXL_20220108_013702581

here is a screen picture.

rspeed commented 2 years ago

i copy and pasted the code and absolutely nothing happened.

Huh. It went the wrong direction.

buck2825 commented 2 years ago

The image is what happens when I use the play button. When I try to paste into the terminal the system does nothing.

greggbmt commented 2 years ago

Was there a resolution for this? I am having exact same issue

greggbmt commented 2 years ago

Does anyone know if this has been resolved? I am having exact same thing happen to me.

rspeed commented 2 years ago

Nope.

buck2825 commented 2 years ago

@zaneclaes linked this bug report to the original code. https://github.com/cncjs/cncjs/issues/137 As that issue is closed I don't see anything happening soon.

@zaneclaes I would open a bug report on cncjs but I don't have a clue how it integrates with Makerverse.

greggbmt commented 2 years ago

I back-graded to webcontrol and my machine is working fine

rspeed commented 2 years ago

I get the feeling like Makerverse is either sending the movement commands too quickly, or gets confused about which command is currently being executed. I assume the controller queues commands.

rspeed commented 2 years ago

I back-graded to webcontrol and my machine is working fine

Same here. I can run the same g code without any issues.