makestuff
commented
4 years ago This repo is marked "JUNK", so you shouldn't use it. I will delete it at some point. Meanwhile, if you want to load firmware into the Cypress FX2LP, you might like fx2loader, which you can build like this (on Debian/Ubuntu you'll need build-essential and libusb-1.0-0-dev packages installed):
$ mkdir $HOME/20170708
$ cd $HOME/20170708
$ wget -qO- http://tiny.cc/msbil | tar zxf -
$ cd makestuff/apps
$ ../scripts/msget.sh makestuff/fx2loader/20170708
Fetching "makestuff/fx2loader/20170708"...
Uncompressing "makestuff/fx2loader/20170708" into "fx2loader" directory...
Fetching "makestuff/common/20170708"...
Uncompressing "makestuff/common/20170708" into "../common" directory...
$ cd fx2loader
$ make deps
:
$ lin.x64/rel/fx2loader --help
FX2Loader Copyright (C) 2009-2011 Chris McClelland
Usage: fx2loader [-h] [-v <VID:PID>] <source> [<destination>]
Upload code to the Cypress FX2LP.
-v, --vidpid=<VID:PID> vendor ID and product ID (e.g 04B4:8613)
-h, --help print this help and exit
<source> where to read from:
eeprom:<size>: external EEPROM (size in kbits)
fileName.hex: I8HEX-format .hex or .ihx file
fileName.bix: binary .bix file
fileName.iic: Cypress .iic-format file
<destination> where to write to:
ram: internal RAM (default)
eeprom: external EEPROM
fileName.hex: I8HEX-format .hex or .ihx file
fileName.bix: binary .bix file
fileName.iic: Cypress .iic-format file
$ If you want to use the FX2LP to talk to an FPGA, you might like FPGALink.
allan@allan-home:/media/allan/c6293bbf-6fa1-49ca-9b01-24855a810e0e/jtag-usb-fx2lp/fx2lp/fx2tools$ make -f Makefile.linux wget -O dump.tgz --no-check-certificate https://github.com/makestuff/dump/tarball/master --2020-01-16 05:13:31-- https://github.com/makestuff/dump/tarball/master Resolving github.com (github.com)... 13.250.177.223 Connecting to github.com (github.com)|13.250.177.223|:443... connected. HTTP request sent, awaiting response... 404 Not Found 2020-01-16 05:13:32 ERROR 404: Not Found.