Closed nakagit closed 7 years ago
I believe this might be related to #39, which is a dumb bug that has been around for too long.
If you try to scan again a second time does it work?
Also can you tell me what to following displays:
docker container ls
actually it sounds more like #43 can you try this:
docker rm -f malice-elk
Thank you for your reply.
1) second time scan didn't work, it shows same error.
2) docker container ls result is here:
NAKAnoMac:Documents naka$ docker container ls
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
2c430746f9ed blacktop/elastic-stack:malice "/sbin/tini -- /us..." 4 minutes ago Up 4 minutes 443/tcp, 0.0.0.0:80->80/tcp, 5601/tcp, 0.0.0.0:9200->9200/tcp, 9300/tcp malice-elk
3) I executed "docker rm -f malice-elk" and "malice scan eicar.com", the same error message displayed.
Cheers, Yukinaka
can you please tell me the output of:
docker logs malice-elk
2017-04-09 01:29:33,939 CRIT Supervisor running as root (no user in config file) 2017-04-09 01:29:33,944 INFO supervisord started with pid 5 2017-04-09 01:29:34,963 INFO spawned: 'nginx' with pid 8 2017-04-09 01:29:34,966 INFO spawned: 'elasticsearch' with pid 9 2017-04-09 01:29:34,969 INFO spawned: 'logstash' with pid 10 2017-04-09 01:29:34,979 INFO spawned: 'kibana' with pid 11 2017-04-09 01:29:36,057 INFO success: nginx entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2017-04-09 01:29:36,058 INFO success: elasticsearch entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2017-04-09 01:29:36,059 INFO success: logstash entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2017-04-09 01:29:40,496 INFO success: kibana entered RUNNING state, process has stayed up for > than 5 seconds (startsecs) 2017-04-09 01:29:55,466 INFO exited: elasticsearch (exit status 1; not expected) 2017-04-09 01:29:56,559 INFO spawned: 'elasticsearch' with pid 66 2017-04-09 01:29:57,490 INFO success: elasticsearch entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2017-04-09 01:30:12,462 INFO exited: elasticsearch (exit status 1; not expected) 2017-04-09 01:30:13,396 INFO spawned: 'elasticsearch' with pid 139 2017-04-09 01:30:14,748 INFO success: elasticsearch entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2017-04-09 01:30:29,448 INFO exited: elasticsearch (exit status 1; not expected) 2017-04-09 01:30:29,534 INFO spawned: 'elasticsearch' with pid 181 2017-04-09 01:30:30,540 INFO success: elasticsearch entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2017-04-09 01:30:50,385 INFO exited: elasticsearch (exit status 1; not expected) 2017-04-09 01:30:51,450 INFO spawned: 'elasticsearch' with pid 222 2017-04-09 01:30:52,482 INFO success: elasticsearch entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2017-04-09 01:31:11,176 INFO exited: elasticsearch (exit status 1; not expected) 2017-04-09 01:31:11,243 INFO spawned: 'elasticsearch' with pid 263 2017-04-09 01:31:12,246 INFO success: elasticsearch entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2017-04-09 01:31:35,153 INFO exited: elasticsearch (exit status 1; not expected) 2017-04-09 01:31:35,262 INFO spawned: 'elasticsearch' with pid 305 2017-04-09 01:31:36,267 INFO success: elasticsearch entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2017-04-09 01:32:06,439 INFO exited: elasticsearch (exit status 1; not expected) (SNIP) 2017-04-09 08:20:03,714 INFO spawned: 'elasticsearch' with pid 28721 2017-04-09 08:20:04,718 INFO success: elasticsearch entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2017-04-09 08:20:17,258 INFO exited: elasticsearch (exit status 1; not expected) 2017-04-09 08:20:18,283 INFO spawned: 'elasticsearch' with pid 28762 2017-04-09 08:20:19,285 INFO success: elasticsearch entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
Regards, Yukinaka
Now we are getting somewhere:
docker exec malice-elk head -n30 /var/log/elasticsearch.stdout.log
Also how much RAM have you allocated to Docker for Mac?
Error response from daemon: Container a14e6cbe392eff73685bd7107c0c9bbf741441fe3e325d4dcd7c1a84dce214c0 is not running
RAM was initially 2GB, but I changed to 6GB.
I'm confused how it could be stopped if you were just getting logs from it? Can you
docker rm -f malice-elk
malice elk
docker exec malice-elk head -n30 /var/log/elasticsearch.stdout.log
$ docker rm -f malice-elk malice-elk $ malice elk $ docker exec malice-elk head -n30 /var/log/elasticsearch.stdout.log
I can't get any messages as above CLI.
docker ps -a
$ docker ps -a
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
72fec55085f3 blacktop/elastic-stack:malice "/sbin/tini -- /us..." 4 minutes ago Up 4 minutes 443/tcp, 0.0.0.0:80->80/tcp, 5601/tcp, 0.0.0.0:9200->9200/tcp, 9300/tcp malice-elk
So that shows the the container is indeed running now.
is docker logs malice-elk
the same?
$ docker logs malice-elk 2017-04-09 23:48:51,270 CRIT Supervisor running as root (no user in config file) 2017-04-09 23:48:51,275 INFO supervisord started with pid 5 2017-04-09 23:48:52,290 INFO spawned: 'nginx' with pid 8 2017-04-09 23:48:52,293 INFO spawned: 'elasticsearch' with pid 9 2017-04-09 23:48:52,300 INFO spawned: 'logstash' with pid 10 2017-04-09 23:48:52,306 INFO spawned: 'kibana' with pid 11 2017-04-09 23:48:53,610 INFO success: nginx entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2017-04-09 23:48:53,611 INFO success: elasticsearch entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2017-04-09 23:48:53,612 INFO success: logstash entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2017-04-09 23:48:57,621 INFO success: kibana entered RUNNING state, process has stayed up for > than 5 seconds (startsecs) 2017-04-09 23:50:13,795 INFO exited: elasticsearch (exit status 1; not expected) 2017-04-09 23:50:14,391 INFO spawned: 'elasticsearch' with pid 107 2017-04-09 23:50:15,398 INFO success: elasticsearch entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2017-04-09 23:50:25,448 INFO exited: elasticsearch (exit status 1; not expected) 2017-04-09 23:50:26,452 INFO spawned: 'elasticsearch' with pid 148 (SNIP) 2017-04-09 23:54:23,155 INFO spawned: 'elasticsearch' with pid 2054 2017-04-09 23:54:24,426 INFO success: elasticsearch entered RUNNING state, process has stayed up for > than 1 seconds (startsecs) 2017-04-09 23:54:27,632 INFO exited: elasticsearch (exit status 1; not expected) 2017-04-09 23:54:28,433 INFO spawned: 'elasticsearch' with pid 2095 2017-04-09 23:54:29,439 INFO success: elasticsearch entered RUNNING state, process has stayed up for > than 1 seconds (startsecs)
can you try again now that the container is running: docker exec malice-elk head -n30 /var/log/elasticsearch.stdout.log
$ docker exec malice-elk head -n30 /var/log/elasticsearch.stdout.log
[2017-04-09T23:50:12,630][INFO ][o.e.n.Node ] [] initializing ...
[2017-04-09T23:50:13,029][WARN ][o.e.b.ElasticsearchUncaughtExceptionHandler] [] uncaught exception in thread [main]
org.elasticsearch.bootstrap.StartupException: java.lang.IllegalStateException: failed to obtain node locks, tried [[/usr/share/elasticsearch/data/elasticsearch]] with lock id [0]; maybe these locations are not writable or multiple nodes were started without increasing [node.max_local_storage_nodes] (was [1])?
at org.elasticsearch.bootstrap.Elasticsearch.init(Elasticsearch.java:125) ~[elasticsearch-5.1.2.jar:5.1.2]
at org.elasticsearch.bootstrap.Elasticsearch.execute(Elasticsearch.java:112) ~[elasticsearch-5.1.2.jar:5.1.2]
at org.elasticsearch.cli.SettingCommand.execute(SettingCommand.java:54) ~[elasticsearch-5.1.2.jar:5.1.2]
at org.elasticsearch.cli.Command.mainWithoutErrorHandling(Command.java:122) ~[elasticsearch-5.1.2.jar:5.1.2]
at org.elasticsearch.cli.Command.main(Command.java:88) ~[elasticsearch-5.1.2.jar:5.1.2]
at org.elasticsearch.bootstrap.Elasticsearch.main(Elasticsearch.java:89) ~[elasticsearch-5.1.2.jar:5.1.2]
at org.elasticsearch.bootstrap.Elasticsearch.main(Elasticsearch.java:82) ~[elasticsearch-5.1.2.jar:5.1.2]
Caused by: java.lang.IllegalStateException: failed to obtain node locks, tried [[/usr/share/elasticsearch/data/elasticsearch]] with lock id [0]; maybe these locations are not writable or multiple nodes were started without increasing [node.max_local_storage_nodes] (was [1])?
at org.elasticsearch.env.NodeEnvironment.<init>(NodeEnvironment.java:259) ~[elasticsearch-5.1.2.jar:5.1.2]
at org.elasticsearch.node.Node.<init>(Node.java:249) ~[elasticsearch-5.1.2.jar:5.1.2]
at org.elasticsearch.node.Node.<init>(Node.java:229) ~[elasticsearch-5.1.2.jar:5.1.2]
at org.elasticsearch.bootstrap.Bootstrap$6.<init>(Bootstrap.java:214) ~[elasticsearch-5.1.2.jar:5.1.2]
at org.elasticsearch.bootstrap.Bootstrap.setup(Bootstrap.java:214) ~[elasticsearch-5.1.2.jar:5.1.2]
at org.elasticsearch.bootstrap.Bootstrap.init(Bootstrap.java:306) ~[elasticsearch-5.1.2.jar:5.1.2]
at org.elasticsearch.bootstrap.Elasticsearch.init(Elasticsearch.java:121) ~[elasticsearch-5.1.2.jar:5.1.2]
... 6 more
Caused by: java.io.IOException: failed to obtain lock on /usr/share/elasticsearch/data/nodes/0
at org.elasticsearch.env.NodeEnvironment.<init>(NodeEnvironment.java:238) ~[elasticsearch-5.1.2.jar:5.1.2]
at org.elasticsearch.node.Node.<init>(Node.java:249) ~[elasticsearch-5.1.2.jar:5.1.2]
at org.elasticsearch.node.Node.<init>(Node.java:229) ~[elasticsearch-5.1.2.jar:5.1.2]
at org.elasticsearch.bootstrap.Bootstrap$6.<init>(Bootstrap.java:214) ~[elasticsearch-5.1.2.jar:5.1.2]
at org.elasticsearch.bootstrap.Bootstrap.setup(Bootstrap.java:214) ~[elasticsearch-5.1.2.jar:5.1.2]
at org.elasticsearch.bootstrap.Bootstrap.init(Bootstrap.java:306) ~[elasticsearch-5.1.2.jar:5.1.2]
at org.elasticsearch.bootstrap.Elasticsearch.init(Elasticsearch.java:121) ~[elasticsearch-5.1.2.jar:5.1.2]
... 6 more
Caused by: java.io.IOException: Mount point not found
at sun.nio.fs.LinuxFileStore.findMountEntry(LinuxFileStore.java:91) ~[?:?]
so I sometimes see those errors on my laptop, but not my desktop. I think it might be a bug in Docker for Mac?
I will look into this more and see if I can understand why it can't obtain the lock. I apologize for the inconvenience and thank you for helping me debug this.
Thank you for finding the problem with me. :)
When this problem will be fixed, I'd like to broadcast this wonderful Malice to my friends and co-workers through SNS (FB, Twitter).
I have made a lot of tweaks to the way elasticsearch works with malice now can you reinstall and retry?
$ rm -rf ~/.malice
$ brew reinstall https://raw.githubusercontent.com/maliceio/malice/master/contrib/homebrew/Formula/malice.rb
you might also have to do a malice plugin update --all
as I rebuilt a lot of plugins to connect to elasticsearch slightly differently.
and finally to show the UI you would run malice elk
to start the kibana interface.
Thank you very much, but I'm afraid the same error happened. Elasticsearch is down.
$ malice scan eicar.com ERRO[0000] ELK is NOT running, starting now...
$ malice scan eicar.com 2017/04/16 20:38:48 Get http://localhost:9200/: EOF
$ docker ps -ls CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES SIZE 7a90d481aff0 blacktop/elastic-stack:malice "/sbin/tini -- /us..." 2 minutes ago Up 2 minutes 443/tcp, 0.0.0.0:80->80/tcp, 5601/tcp, 0.0.0.0:9200->9200/tcp, 9300/tcp malice-elk 175MB (virtual 690MB)
$ curl http://localhost:9200 curl: (52) Empty reply from server
KInd regards, YN
so I am not sure you removed the .malice
directory because it should not be using the blacktop/elastic-stack:malice
image
please make sure to rm -rf ~/.malice
⚠️ if you aren't familiar with this command be careful as you can destroy your home directory or worse if you do a typo.
the reason for this is that is where the old config files are stored and malice doesn't overwrite those on a reinstall.
also maybe you have to brew remove malice
and then brew install https://raw.githubusercontent.com/maliceio/malice/master/contrib/homebrew/Formula/malice.rb
instead of trying to reinstall
it?
Yes, I removed .malice directory, using "rm -rf ~/.malice" command.
Then, what I did was: brew reinstall https://raw.githubusercontent.com/maliceio/malice/master/contrib/homebrew/Formula/malice.rb
So, next, I'll execute:
After that, I'll let you know results.
Many thanks, YN
After that, I run following step3 command:
goroutine 1 [running]: github.com/maliceio/malice/malice/docker/client/container.Start(0xc42038a810, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0xc420193300, 0x0, ...) /private/tmp/malice-20170417-3326-15rlxnr/gopath/src/github.com/maliceio/malice/malice/docker/client/container/start.go:74 +0x468 github.com/maliceio/malice/malice/ui.Start(0xc42038a810, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, ...) /private/tmp/malice-20170417-3326-15rlxnr/gopath/src/github.com/maliceio/malice/malice/ui/ui.go:32 +0x29e github.com/maliceio/malice/commands.cmdELK(0xc4202e9400, 0x16bd55f, 0x4) /private/tmp/malice-20170417-3326-15rlxnr/gopath/src/github.com/maliceio/malice/commands/elk.go:19 +0xdb github.com/maliceio/malice/commands.glob..func4(0xc4202e9400, 0x0, 0xc4202e9400) /private/tmp/malice-20170417-3326-15rlxnr/gopath/src/github.com/maliceio/malice/commands/commands.go:69 +0x4d github.com/maliceio/malice/vendor/github.com/urfave/cli.HandleAction(0x15ccba0, 0x16e1e80, 0xc4202e9400, 0xc4201d3f00, 0x0) /private/tmp/malice-20170417-3326-15rlxnr/gopath/src/github.com/maliceio/malice/vendor/github.com/urfave/cli/app.go:485 +0xd4 github.com/maliceio/malice/vendor/github.com/urfave/cli.Command.Run(0x16bcde1, 0x3, 0x0, 0x0, 0x0, 0x0, 0x0, 0x16cd706, 0x1e, 0x0, ...) /private/tmp/malice-20170417-3326-15rlxnr/gopath/src/github.com/maliceio/malice/vendor/github.com/urfave/cli/command.go:207 +0xb72 github.com/maliceio/malice/vendor/github.com/urfave/cli.(*App).Run(0xc420065520, 0xc42006c080, 0x2, 0x2, 0x0, 0x0) /private/tmp/malice-20170417-3326-15rlxnr/gopath/src/github.com/maliceio/malice/vendor/github.com/urfave/cli/app.go:250 +0x7d0 main.main() /private/tmp/malice-20170417-3326-15rlxnr/gopath/src/github.com/maliceio/malice/main.go:83 +0x470
Any comments or suggestion to mentions, what I can help.
Many thanks, YN
that is so strange you are still using the old config file? which should be in the ~/.malice/config.toml
when you uninstall malice are you running:
brew uninstall malice
brew cleaup
brew prune
rm -rf ~/.malice
brew install https://raw.githubusercontent.com/maliceio/malice/master/contrib/homebrew/Formula/malice.rb
also you might want to clear out the stale docker containers
what does it display when you run
docker ps -a
I'm afraid I couldn't uninstall malice.rb as following: $brew uninstall https://raw.githubusercontent.com/maliceio/malice/master/contrib/homebrew/Formula/malice.rb
curl: (22) The requested URL returned error: 404 Not Found Error: Failure while executing: /usr/bin/curl --remote-time --location --user-agent Homebrew/1.1.12\ (Macintosh;\ Intel\ macOS\ 10.12.4)\ curl/7.51.0 --progress-bar --fail https://raw.githubusercontent.com/maliceio/malice/master/contrib/homebrew/formula/malice.rb -o /Users/naka/Library/Caches/Homebrew/Formula/malice.rb
I apologize I corrected it above can you try those commands also have to cleared out stale docker containers? What did docker ps -a
display?
it might be easier to talk about this in the gitter chat room? here -> https://gitter.im/maliceio/malice
$ docker ps -a CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES 25314793a0c0 blacktop/elastic-stack:malice "/sbin/tini -- /us..." About a minute ago Up About a minute 80/tcp, 443/tcp, 5601/tcp, 9300/tcp, 0.0.0.0:9200->9200/tcp malice-elk
oh wait, you probably need to clear out the malice volumes too
brew install docker-clean
docker-clean stop
I did 2 commands:
$ brew install docker-clean ==> Using the sandbox ==> Downloading https://github.com/ZZROTDesign/docker-clean/archive/v2.0.4.tar.gz ==> Downloading from https://codeload.github.com/ZZROTDesign/docker-clean/tar.gz/v2.0.4 ######################################################################## 100.0% 🍺 /usr/local/Cellar/docker-clean/2.0.4: 5 files, 32KB, built in 7 seconds
$ docker-clean stop Stopping running containers... Containers stopped: 1 Cleaning containers... Stopped containers cleaned: 1 No images to delete! Cleaning existing dangling volumes... Volumes cleaned: 13 Removing empty networks... Networks removed: 1
okay now you have a clean docker instance
now can you once again (just to be sure) reinstall malice
brew uninstall malice
brew cleaup
brew prune
rm -rf ~/.malice
brew install https://raw.githubusercontent.com/maliceio/malice/master/contrib/homebrew/Formula/malice.rb
I found 1 error though:
$ brew uninstall malice Uninstalling /usr/local/Cellar/malice/0.2.0-alpha... (4 files, 16.6MB) $ brew cleaup Error: Unknown command: cleaup $ brew prune $ rm -rf ~/.malice $ brew install https://raw.githubusercontent.com/maliceio/malice/master/contrib/homebrew/Formula/malice.rb ######################################################################## 100.0% ==> Cloning https://github.com/maliceio/malice.git Updating /Users/naka/Library/Caches/Homebrew/malice--git ==> Checking out revision 45135615e0e8d3405ea5d2e41b23d6b9226d2483 ==> go get -v ==> go build -o /usr/local/Cellar/malice/0.2.0-alpha/bin/malice ==> Caveats zsh completions have been installed to: /usr/local/share/zsh/site-functions ==> Summary 🍺 /usr/local/Cellar/malice/0.2.0-alpha: 4 files, 16.6MB, built in 1 minute 6 seconds
sorry typo: brew cleanup
can you run this now
then run malice -D elk
please
Thank you so much. I saw UI without any errors. :)
You fixed the problem.
haha I am glad we finally got the bottom of this 👍 I hope you enjoy malice
$ malice -D elk
DEBU[0000] Malice config loaded from: /Users/naka/.malice/config.toml
DEBU[0000] Malice plugins loaded from plugins/bindata.go
DEBU[0000] Using 2 PROCS
DEBU[0000] Malice Version: 0.2.0-alpha
DEBU[0000] Running on Docker for Mac...
DEBU[0000] Connected to docker daemon client ip=localhost port=2375
DEBU[0000] Searching for Network: malice env=development
DEBU[0000] Network NOT Found: malice env=development
ERRO[0000] Network malice does not exist, creating now... env=development exisits=false network=malice
INFO[0000] Created Network: malice env=development name=malice
DEBU[0000] Searching for volume: malice env=development
DEBU[0000] Volume NOT Found: malice env=development
DEBU[0000] Volume malice not found.
INFO[0000] Created Volume: malice env=development
DEBU[0000] Volume malice found.
DEBU[0000] Searching for container: malice-elastic env=development
DEBU[0000] Container NOT Found: malice-elastic env=development
DEBU[0000] Searching for image: blacktop/elasticsearch:5.3 env=development
DEBU[0000] Image NOT Found: blacktop/elasticsearch:5.3 env=development
DEBU[0000] Pulling Image blacktop/elasticsearch:5.3
env=development exisits=false
5.3: Pulling from blacktop/elasticsearch
627beaf3eaaf: Pull complete
(SNIP)
INFO[0035] Elasticsearch came online after 14 seconds
DEBU[0036] Searching for Network: malice env=development
DEBU[0036] Network FOUND: malice env=development
DEBU[0036] Searching for volume: malice env=development
DEBU[0036] Volume FOUND: malice env=development
DEBU[0036] Volume malice found.
DEBU[0036] Searching for container: malice-kibana env=development
DEBU[0036] name: malice-kibana container.Name: malice-elastic
DEBU[0036] MATCH: false
DEBU[0036] Container NOT Found: malice-kibana env=development
DEBU[0036] Searching for image: blacktop/kibana:malice env=development
DEBU[0036] Image NOT Found: blacktop/kibana:malice env=development
DEBU[0036] Pulling Image blacktop/kibana:malice
env=development exisits=false
malice: Pulling from blacktop/kibana
627beaf3eaaf: Already exists
2a59a1e54a66: Pull complete
58cdd4000043: Pull complete
8cd6b4bbf06a: Pull complete
41c65ab01d2a: Pull complete
Digest: sha256:d8ce72e7932211bad058a862153e447582d50b9544df98fd76f8eac0a982d16a
Status: Downloaded newer image for blacktop/kibana:malice
INFO[0056] Kibana Container Started env=development ip=localhost name="/malice-kibana" port=[443]
I'll broadcast your fantastic tool!!!!
😁
Output of
go version
:Output of
docker version
:Output of
docker info
:Additional environment details (AWS, VirtualBox, physical, Docker For Mac, Docker Toolbox, docker-machine, etc.): Docker for Mac (both Stable and Edge)
Steps to reproduce the issue:
Describe the results you received: NAKAnoMac:Documents naka$ malice scan eicar.com ERRO[0000] ELK is NOT running, starting now...
ERRO[0000] Network malice does not exist, creating now... env=development exisits=false network=malice INFO[0000] Created Network: malice env=development name=malice INFO[0000] Created Volume: malice env=development malice: Pulling from blacktop/elastic-stack 6daefd62341a: Pull complete 1a4b6fdf1cbc: Pull complete f7f8f9c33278: Pull complete fafb758ceb1e: Pull complete fa9c50d99ebd: Pull complete 131e2f46387f: Pull complete a93ae444a66e: Pull complete 60c40cde4484: Pull complete 951cf1a26798: Pull complete 96500fc9281c: Pull complete ebbab98cd3d6: Pull complete 8a0a3f1821e1: Pull complete e0b9a6e91066: Pull complete ef6d67c6936a: Pull complete 13babcce34b4: Pull complete ab70c63bac5d: Pull complete 43c221c5bda4: Pull complete 4e71693b9b02: Pull complete 9ea4b19c8600: Pull complete Digest: sha256:9342541bdead2c9e12988032117395d133e8e20b72c1a1a1583ef9dd3d618fef Status: Downloaded newer image for blacktop/elastic-stack:malice NAKAnoMac:Documents naka$ malice scan eicar.com 2017/04/09 03:32:34 Get http://localhost:9200/: EOF
Describe the results you expected:
Additional information you deem important (e.g. issue happens only occasionally): When I access "http://localhost:9200", the following message were shown. ERR_EMPTY_RESPONSE
Thanks in advance, Yukinaka