Closed zainurihasan closed 3 months ago
Looks like you are not drawing any power or the current transformer isn't attached properly. Make sure to have the current transformer attached on ONE of the TWO wires (Important to only put ONE of the power wires through the Current transformer hole. Either the Live or the Neutral but NOT BOTH). And then make sure the device is drawing some power.
Looks like you are not drawing any power or the current transformer isn't attached properly. Make sure to have the current transformer attached on ONE of the TWO wires (Importatnt to only put ONE of the power wires through the Current transformer hole. Either the Live or the Neutral but NOT BOTH). And then make sure the device is drawing some power.
Has your issue been resolved? If so please kindly close this issue. Thanks :)
i use the example & wemos d1 mini pro after testing the example code, it only shows voltage & frequency, and other data is 0
here is serial monitor log: Custom Address:1 Voltage: 227.90V Current: 0.00A Power: 0.00W Energy: 0.000kWh Frequency: 50.0Hz PF: 0.00
can anyone help me?