search

maniacbug / RF24

Arduino driver for nRF24L01
http://maniacbug.github.com/RF24
950 stars 770 forks source link

Cant get Getting started working #9

Open Ardidrones opened 12 years ago

Ardidrones commented 12 years ago

Hi Guys

I have a few of these units lying at home and cant get them to work , I found this site lastweek and have been trying to get the” getting started” example working but with no luck, checked all the wires 4 times made all the libraries local in the Pde to try cancel out file path issues , but still nothing when i start the serial monitor next to all the Config print lines I get 0xff so it seesm like the radio doesnt int. properly . any ideas?

maniacbug commented 12 years ago

Sorry, no.  If the wires are hooked up correctly, and the modules are functioning correctly, this will always work.

----- Original Message ----- From: Ardidrones reply@reply.github.com To: maniacbug maniacbug@ymail.com Cc: Sent: Sunday, July 22, 2012 1:11 AM Subject: [RF24] Cant get Getting started working (#9)

Hi Guys

I have a few of these units lying at home and cant get them to work , I found this site lastweek and have been trying to get the” getting started” example working but with no luck, checked all the wires 4 times made all the libraries local in the Pde to try cancel out file path issues , but still nothing when i start the serial monitor next to all the Config print lines I get 0xff so it seesm like the radio doesnt int. properly . any ideas?

Reply to this email directly or view it on GitHub: https://github.com/maniacbug/RF24/issues/9

Ardidrones commented 12 years ago

Why would you define them as 9,10 then in the software

Please safe our environment and do not print this email.

On Jul 22, 2012, at 21:47, maniacbugreply@reply.github.com wrote:

Sorry, no. If the wires are hooked up correctly, and the modules are functioning correctly, this will always work.

----- Original Message ----- From: Ardidrones reply@reply.github.com To: maniacbug maniacbug@ymail.com Cc: Sent: Sunday, July 22, 2012 1:11 AM Subject: [RF24] Cant get Getting started working (#9)

Hi Guys

I have a few of these units lying at home and cant get them to work , I found this site lastweek and have been trying to get the” getting started” example working but with no luck, checked all the wires 4 times made all the libraries local in the Pde to try cancel out file path issues , but still nothing when i start the serial monitor next to all the Config print lines I get 0xff so it seesm like the radio doesnt int. properly . any ideas?

Reply to this email directly or view it on GitHub: https://github.com/maniacbug/RF24/issues/9

Reply to this email directly or view it on GitHub: https://github.com/maniacbug/RF24/issues/9#issuecomment-7164834

maniacbug commented 12 years ago

Because the Getting Started blog posts instructs to hook up lines 9 & 10 to CE & CSN.

----- Original Message ----- From: Ardidrones reply@reply.github.com To: maniacbug maniacbug@ymail.com Cc: Sent: Sunday, July 22, 2012 12:55 PM Subject: Re: [RF24] Cant get Getting started working (#9)

Why would you define them as 9,10 then  in the software

Please safe our environment and do not print this email.

On Jul 22, 2012, at 21:47, maniacbugreply@reply.github.com wrote:

Sorry, no.  If the wires are hooked up correctly, and the modules are functioning correctly, this will always work.

----- Original Message ----- From: Ardidrones reply@reply.github.com To: maniacbug maniacbug@ymail.com Cc: Sent: Sunday, July 22, 2012 1:11 AM Subject: [RF24] Cant get Getting started working  (#9)

Hi Guys

I have a few of these units lying at home and cant get them to work , I found this site lastweek and have been trying to get the” getting started” example working but with no luck, checked all the wires 4 times made all the libraries local in the Pde to try cancel out file path issues , but still nothing when i start the serial monitor next to all the Config print lines I get 0xff so it seesm like the radio doesnt int. properly . any ideas?

Reply to this email directly or view it on GitHub: https://github.com/maniacbug/RF24/issues/9

Reply to this email directly or view it on GitHub: https://github.com/maniacbug/RF24/issues/9#issuecomment-7164834

Reply to this email directly or view it on GitHub: https://github.com/maniacbug/RF24/issues/9#issuecomment-7164896

Ardidrones commented 12 years ago

Okay thanx , I have followed your blog even to the colors of wires you used but I can get it to work they why you do , where can I start testing if my units isn't maybe faulty ? I hope they not but you never know with china .

Please safe our environment and do not print this email.

On Jul 22, 2012, at 22:16, maniacbugreply@reply.github.com wrote:

Because the Getting Started blog posts instructs to hook up lines 9 & 10 to CE & CSN.

----- Original Message ----- From: Ardidrones reply@reply.github.com To: maniacbug maniacbug@ymail.com Cc: Sent: Sunday, July 22, 2012 12:55 PM Subject: Re: [RF24] Cant get Getting started working (#9)

Why would you define them as 9,10 then in the software

Please safe our environment and do not print this email.

On Jul 22, 2012, at 21:47, maniacbugreply@reply.github.com wrote:

Sorry, no. If the wires are hooked up correctly, and the modules are functioning correctly, this will always work.

----- Original Message ----- From: Ardidrones reply@reply.github.com To: maniacbug maniacbug@ymail.com Cc: Sent: Sunday, July 22, 2012 1:11 AM Subject: [RF24] Cant get Getting started working (#9)

Hi Guys

I have a few of these units lying at home and cant get them to work , I found this site lastweek and have been trying to get the” getting started” example working but with no luck, checked all the wires 4 times made all the libraries local in the Pde to try cancel out file path issues , but still nothing when i start the serial monitor next to all the Config print lines I get 0xff so it seesm like the radio doesnt int. properly . any ideas?

Reply to this email directly or view it on GitHub: https://github.com/maniacbug/RF24/issues/9

Reply to this email directly or view it on GitHub: https://github.com/maniacbug/RF24/issues/9#issuecomment-7164834

Reply to this email directly or view it on GitHub: https://github.com/maniacbug/RF24/issues/9#issuecomment-7164896

Reply to this email directly or view it on GitHub: https://github.com/maniacbug/RF24/issues/9#issuecomment-7165187

Ardidrones commented 11 years ago

Hi maniacbug

I keep getting a EEPROM_update not declared when I try compile sensor net . Any idea?

Thanx for any help

Please safe our environment and do not print this email.

evonode commented 10 years ago

First and for most. Thank you for all your work on this. I have configured two boards just like your site says on http://maniacbug.wordpress.com/2011/11/02/getting-started-rf24/ . Get them both started and both on the monitor so I can see the status. At this point I press "t" on my Monitor of Com4. It reports that it is Failing. I toggle com 4 back by pressing "r". I press "t" on my Monitor of Com3 and I start to get a good result. Now if I toggle com3 back with a "r" and toggle Com4 to "t"...it works good now.