search

manolena / DIY-Soldering-Station-w-Arduino-Nano-4x20-LCD

GNU General Public License v3.0
10 stars 12 forks source link

Problem with version Oled #2

Open Skillertheking opened 6 years ago

Skillertheking commented 6 years ago

hey Manos

i had some problems:

the PWM indicator does not exceed 19% but the soldering iron heats up completely

in the Micro_9 sketch, I do not understand what the #define ALIVEpin_13 is

and it may be that the two potentiometers one for the temperature curve and the other for the temperature zero point (25 °) setting is? I do not quite understand that. maybe you have a directive on how much ohm I have to set this 2?

i have the hakko 936 chinese version and on the board the Arduino micro Pro (I made pin adjustments) 1,3" Oled display

best regards from Germany

Iryme commented 6 years ago

Hey Skillertheking,

I have the same problem, did you manage to do something ?

Thank you.

manolena commented 4 years ago

Dear friends, Health reasons kept me away for a long time from git. Please, accept my apologies for that. Now, please check the file MICRO_9a. The #define ALIVEpin_13 is just for debugging reasons, it blinks the on-board LED associated with pin 13 of Micro. The settings of the two pots are experimentally found, depending on the heating element you use.