search

mantri-govind / diy-layout-creator

Automatically exported from code.google.com/p/diy-layout-creator
0 stars 0 forks source link

Component requests #62

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago 

Please add the following: Zener diode symbol for schematics, 14 Pin IC for 
layouts, IC symbol for schematics, JFET symbol for schematics, Ferrite bead for 
layout and schematics, Pots for schematic and layouts, 3PDT switch, SPDT 
switch, SPST switch, LED symbol for schematics, Stereo and Mono jacks for 
layouts, 9V Battery and DC power jack for layouts, & finally the ability to 
make lines with arrows at the ends.

Original issue reported on code.google.com by Jasonmat...@aol.com on 25 Apr 2011 at 5:04

GoogleCodeExporter commented 9 years ago 
The property of the Boards is currently just a squar shape, could the
team add a select property where one can also select round shape boards.
Currently the Solder Pad can be either round or square, dependent of the type 
selected.

Original comment by lglas...@telkomsa.net on 25 Apr 2011 at 6:23

GoogleCodeExporter commented 9 years ago 
Sorry my comment should have not been placed here.

Original comment by lglas...@telkomsa.net on 25 Apr 2011 at 6:36

GoogleCodeExporter commented 9 years ago 
Ok, I hadn't messed with this enough, so now I realized I had to double click 
on components for more options, but it would still be nice if you could add the 
following for drawing schematics as well:

FOR SCHEMATICS:
*IC symbol
*Zener diode symbol
*LED symbol
*Ferrite Bead symbol
*JFET symbol
*Ability to draw lines w/ arrows (For GND and variable resistor symbols in 
schematics)

FOR LAYOUTS:
* Stereo & Mono jack symbols for Layouts
*DC Power Jack symbol w/ 3 lugs for Layouts
*Battery symbol w/ (+) & (-)

Original comment by fsunun...@gmail.com on 26 Apr 2011 at 5:36

GoogleCodeExporter commented 9 years ago 
It would be brilliant if you could create new components in runtime. Still, big 
thumbs up for the best Stripboard program I've seen.

Original comment by JLNo...@gmail.com on 11 Nov 2011 at 2:33

GoogleCodeExporter commented 9 years ago 
Well, how about adding a feature:
The ability to rotate switches.

Original comment by CodeMo...@gmail.com on 17 Dec 2011 at 2:10

GoogleCodeExporter commented 9 years ago 
Issue 138 has been merged into this issue.

Original comment by bancika@gmail.com on 4 Sep 2012 at 1:01

GoogleCodeExporter commented 9 years ago 
Issue 137 has been merged into this issue.

Original comment by bancika@gmail.com on 4 Sep 2012 at 1:01

GoogleCodeExporter commented 9 years ago 
Issue 102 has been merged into this issue.

Original comment by bancika@gmail.com on 4 Sep 2012 at 1:01

GoogleCodeExporter commented 9 years ago 
Issue 69 has been merged into this issue.

Original comment by bancika@gmail.com on 4 Sep 2012 at 1:01

GoogleCodeExporter commented 9 years ago

Original comment by bancika@gmail.com on 4 Sep 2012 at 1:01

GoogleCodeExporter commented 9 years ago 
Issue 59 has been merged into this issue.

Original comment by bancika@gmail.com on 4 Sep 2012 at 1:02

GoogleCodeExporter commented 9 years ago 
* Small push button 3x3 grid 0.1in
* headers or 7 segment leds (HD1133R)

Original comment by fragme....@gmail.com on 11 Sep 2012 at 11:19

GoogleCodeExporter commented 9 years ago 
De 7 normal segments leds are in a grid of 5*6 on 0.1inch.

Original comment by fragme....@gmail.com on 12 Sep 2012 at 9:11

GoogleCodeExporter commented 9 years ago 
integrated bridge rectifier is a circle or a rectangle with 4 legs but it would 
be nice to have it as a component.

And a fuse would be handy part too.

Original comment by smrtokvi...@gmail.com on 14 Jan 2013 at 9:29