maoaichiyu / autoddvpn

Automatically exported from code.google.com/p/autoddvpn
0 stars 0 forks source link

最近一直无法翻墙 #115

Open GoogleCodeExporter opened 9 years ago

GoogleCodeExporter commented 9 years ago
請描述一下您進行怎樣的操作之後碰到了問題
1.我采用的是WgetMode方式翻墙。http://code.google.com/p/autoddvpn/wiki/
WgetMode。
2.半年来刚开始基本可以稳定翻墙。但最近1-2个月以来基本�
��法翻墙。
3.期望能帮我查明,能够稳定翻墙。

請提供以下資訊:

1. 您的路由器型號:
TP-LINK TL-WR941N

2. DD-WRT版本:
Firmware: DD-WRT v24-sp2 (11/21/10) std

5. autoddvpn的連線模式(pptp+wget, pptp+jffs, openvpn+jffs等):
pptp+wget

6. autoddvpn的運行模式,傳統模式(classicMode)還是優雅模式(g
raceMode):

7. DD-WRT WAN口連線模式是 pptp or dhcp or static :
static

8. 運行autoddvpn之後DD-WRT 的命令輸出 # route -n  | tail -n 20 :
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.118.118 0.0.0.0         255.255.255.255 UH    0      0        0 eth0
192.168.118.0   0.0.0.0         255.255.255.0   U     0      0        0 eth0
192.168.119.0   0.0.0.0         255.255.255.0   U     0      0        0 br0
169.254.0.0     0.0.0.0         255.255.0.0     U     0      0        0 br0
127.0.0.0       0.0.0.0         255.0.0.0       U     0      0        0 lo
0.0.0.0         192.168.118.118 0.0.0.0         UG    0      0        0 eth0

如果方便的話,請參考這裡的說明,貼上autoddvpn.log內容
cat /tmp/autoddvpn.log的结果如下:
[INFO#743] 01/Jan/1970:00:00:09 log starts
[INFO#743] 01/Jan/1970:00:00:09 pptp+wget mode
[INFO#743] 01/Jan/1970:00:00:09 getting vpnup.sh

最後如果可能的話,請附上截屏或任何可能有幫助的夾檔

Original issue reported on code.google.com by luwei...@gmail.com on 20 Jan 2012 at 2:46