v0.49 r69, GUI will no longer read values from the board and cannot flash back to earlier firmware.

GoogleCodeExporter commented 8 years ago

What steps will reproduce the problem?
1. Version 0.49 r69 firmware
2. Martinez brushless gimbal control board

What is the expected output? What do you see instead?

GUI should be able to read values but instead it gets stuck at PAR:Reading 
Values or something along those lines.

The board can no longer have firmware uploaded to it by arduino, gets the error 
"avrdude: stk500_getsync(): not in sync: resp=0x00"

What version of the product are you using? On what operating system?

Windows 7, 64bit, with driver fix (here 
http://www.rcgroups.com/forums/showthread.php?t=1872416)

Firmware version 0.49 r69

Please provide any additional information below.

Was working fine on 0.49 r45, uploaded to 0.49 r69 without problem, but shortly 
after the board would no longer communicate with the GUI.

Many others are having this issue as well (see posts on these last couple of 
pages http://www.rcgroups.com/forums/showthread.php?t=1829058&page=149)

Original issue reported on code.google.com by charlie....@gmail.com on 10 Jun 2013 at 7:50

GoogleCodeExporter commented 8 years ago

Reflashing the bootloader and reuploading the firmware fixed this problem. I am 
now running the latest 0.49B r77.

Original comment by charlie....@gmail.com on 18 Jun 2013 at 7:09

GoogleCodeExporter commented 8 years ago

Hi Dear, how i can Reflashing the bootloader? Thanks

Original comment by alexandr...@iea.org.br on 16 Sep 2013 at 12:03

maokk / brushless-gimbal

v0.49 r69, GUI will no longer read values from the board and cannot flash back to earlier firmware. #11