Error using mex (line 206) Unable to complete successfully.

Unfortunately I can not install the kit properly!

I face these errors!! please help me

Error in InstallECGkit (line 204) eval(['mex -outdir ''' common_path ''' ''' [common_path source_files(ii).name] '''']);

Hi Sepher, the kit installation routines simply set some paths and make sure that you have all the required files and folders in your path. Then, tries to compile some MEX C lang. routines into binaries. Unfortunately, the MEX compiler was not properly included in the last Matlab versions I used (2011, 12 and 13) and required some extra installation, you can google how to set up the MEX compiler. For this reason, I included several pre-compiled binaries, so, sometimes this message is just a warning, cause the kit already works, you can try some examples in the example folder.

Good luck, M.

El dom, 25 dic 2022 a la(s) 17:58, Sepehr Kalanaki @.***) escribió:

[image: image] https://user-images.githubusercontent.com/101628099/209481784-32ef4227-99a0-43e2-893f-e107c3e6d40b.png Unfortunately I can not install the kit properly!

I face these errors!! please help me

Error using mex (line 206) Unable to complete successfully.

Error in InstallECGkit (line 204) eval(['mex -outdir ''' common_path ''' ''' [common_path source_files(ii).name] '''']);

— Reply to this email directly, view it on GitHub https://github.com/marianux/ecg-kit/issues/21, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBRMNHGM4IY6YCZDCFWDO3WPCYRHANCNFSM6AAAAAATJFEYJQ . You are receiving this because you are subscribed to this thread.Message ID: @.***>

Thank you for your answer. I installed matlab 2013 and then installed visual studio 2010 professional and then ran the mex -setup command on matlab. The corresponding compiler got installed and after that the kit got installed completely without any errors as well!

[image: Mailtrack] https://mailtrack.io?utm_source=gmail&utm_medium=signature&utm_campaign=signaturevirality11& Sender notified by Mailtrack https://mailtrack.io?utm_source=gmail&utm_medium=signature&utm_campaign=signaturevirality11& 12/27/22, 11:33:20 PM

On Tue, Dec 27, 2022 at 4:12 PM Mariano Llamedo @.***> wrote:

Hi Sepher, the kit installation routines simply set some paths and make sure that you have all the required files and folders in your path. Then, tries to compile some MEX C lang. routines into binaries. Unfortunately, the MEX compiler was not properly included in the last Matlab versions I used (2011, 12 and 13) and required some extra installation, you can google how to set up the MEX compiler. For this reason, I included several pre-compiled binaries, so, sometimes this message is just a warning, cause the kit already works, you can try some examples in the example folder.

Good luck, M.

El dom, 25 dic 2022 a la(s) 17:58, Sepehr Kalanaki @.***) escribió:

[image: image] < https://user-images.githubusercontent.com/101628099/209481784-32ef4227-99a0-43e2-893f-e107c3e6d40b.png

Unfortunately I can not install the kit properly!

I face these errors!! please help me

Error using mex (line 206) Unable to complete successfully.

Error in InstallECGkit (line 204) eval(['mex -outdir ''' common_path ''' ''' [common_path source_files(ii).name] '''']);

— Reply to this email directly, view it on GitHub https://github.com/marianux/ecg-kit/issues/21, or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABBRMNHGM4IY6YCZDCFWDO3WPCYRHANCNFSM6AAAAAATJFEYJQ

. You are receiving this because you are subscribed to this thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/marianux/ecg-kit/issues/21#issuecomment-1365874724, or unsubscribe https://github.com/notifications/unsubscribe-auth/AYHLRQ5PPINCLHQWPR7JUCDWPLP2RANCNFSM6AAAAAATJFEYJQ . You are receiving this because you authored the thread.Message ID: @.***>

Glad to hear that! thanks.

El mar, 27 dic 2022 a la(s) 17:06, Sepehr Kalanaki @.***) escribió:

Thank you for your answer. I installed matlab 2013 and then installed visual studio 2010 professional and then ran the mex -setup command on matlab. The corresponding compiler got installed and after that the kit got installed completely without any errors as well!

[image: Mailtrack] < https://mailtrack.io?utm_source=gmail&utm_medium=signature&utm_campaign=signaturevirality11&

Sender notified by Mailtrack < https://mailtrack.io?utm_source=gmail&utm_medium=signature&utm_campaign=signaturevirality11&

12/27/22, 11:33:20 PM

On Tue, Dec 27, 2022 at 4:12 PM Mariano Llamedo @.***> wrote:

Hi Sepher, the kit installation routines simply set some paths and make sure that you have all the required files and folders in your path. Then, tries to compile some MEX C lang. routines into binaries. Unfortunately, the MEX compiler was not properly included in the last Matlab versions I used (2011, 12 and 13) and required some extra installation, you can google how to set up the MEX compiler. For this reason, I included several pre-compiled binaries, so, sometimes this message is just a warning, cause the kit already works, you can try some examples in the example folder.

Good luck, M.

El dom, 25 dic 2022 a la(s) 17:58, Sepehr Kalanaki @.***) escribió:

[image: image] <

https://user-images.githubusercontent.com/101628099/209481784-32ef4227-99a0-43e2-893f-e107c3e6d40b.png

Unfortunately I can not install the kit properly!

I face these errors!! please help me

Error using mex (line 206) Unable to complete successfully.

Error in InstallECGkit (line 204) eval(['mex -outdir ''' common_path ''' ''' [common_path source_files(ii).name] '''']);

— Reply to this email directly, view it on GitHub https://github.com/marianux/ecg-kit/issues/21, or unsubscribe <

https://github.com/notifications/unsubscribe-auth/ABBRMNHGM4IY6YCZDCFWDO3WPCYRHANCNFSM6AAAAAATJFEYJQ

. You are receiving this because you are subscribed to this thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/marianux/ecg-kit/issues/21#issuecomment-1365874724, or unsubscribe < https://github.com/notifications/unsubscribe-auth/AYHLRQ5PPINCLHQWPR7JUCDWPLP2RANCNFSM6AAAAAATJFEYJQ

. You are receiving this because you authored the thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/marianux/ecg-kit/issues/21#issuecomment-1366149640, or unsubscribe https://github.com/notifications/unsubscribe-auth/ABBRMNCPJ45TQE33QTAFRJ3WPND3ZANCNFSM6AAAAAATJFEYJQ . You are receiving this because you commented.Message ID: @.***>

Dear dr.Llamedo

sorry to bother you again! I wanted to know the ECG-kit's strengths and weaknesses from your point of view because you have actually created this amazing kit! I need to know the pros and cons of this kit for my final project of Biomedical signal processing course at University.

sincerely Sepehr Kalanaki

On Wed, Dec 28, 2022 at 1:50 PM Mariano Llamedo @.***> wrote:

Glad to hear that! thanks.

El mar, 27 dic 2022 a la(s) 17:06, Sepehr Kalanaki @.***) escribió:

Thank you for your answer. I installed matlab 2013 and then installed visual studio 2010 professional and then ran the mex -setup command on matlab. The corresponding compiler got installed and after that the kit got installed completely without any errors as well!

[image: Mailtrack] <

https://mailtrack.io?utm_source=gmail&utm_medium=signature&utm_campaign=signaturevirality11&

Sender notified by Mailtrack <

https://mailtrack.io?utm_source=gmail&utm_medium=signature&utm_campaign=signaturevirality11&

12/27/22, 11:33:20 PM

On Tue, Dec 27, 2022 at 4:12 PM Mariano Llamedo @.***> wrote:

Hi Sepher, the kit installation routines simply set some paths and make sure that you have all the required files and folders in your path. Then, tries to compile some MEX C lang. routines into binaries. Unfortunately, the MEX compiler was not properly included in the last Matlab versions I used (2011, 12 and 13) and required some extra installation, you can google how to set up the MEX compiler. For this reason, I included several pre-compiled binaries, so, sometimes this message is just a warning, cause the kit already works, you can try some examples in the example folder.

Good luck, M.

El dom, 25 dic 2022 a la(s) 17:58, Sepehr Kalanaki @.***) escribió:

[image: image] <

https://user-images.githubusercontent.com/101628099/209481784-32ef4227-99a0-43e2-893f-e107c3e6d40b.png

Unfortunately I can not install the kit properly!

I face these errors!! please help me

Error using mex (line 206) Unable to complete successfully.

Error in InstallECGkit (line 204) eval(['mex -outdir ''' common_path ''' ''' [common_path source_files(ii).name] '''']);

— Reply to this email directly, view it on GitHub https://github.com/marianux/ecg-kit/issues/21, or unsubscribe <

https://github.com/notifications/unsubscribe-auth/ABBRMNHGM4IY6YCZDCFWDO3WPCYRHANCNFSM6AAAAAATJFEYJQ

. You are receiving this because you are subscribed to this thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub <https://github.com/marianux/ecg-kit/issues/21#issuecomment-1365874724 , or unsubscribe <

https://github.com/notifications/unsubscribe-auth/AYHLRQ5PPINCLHQWPR7JUCDWPLP2RANCNFSM6AAAAAATJFEYJQ

. You are receiving this because you authored the thread.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/marianux/ecg-kit/issues/21#issuecomment-1366149640, or unsubscribe < https://github.com/notifications/unsubscribe-auth/ABBRMNCPJ45TQE33QTAFRJ3WPND3ZANCNFSM6AAAAAATJFEYJQ

. You are receiving this because you commented.Message ID: @.***>

— Reply to this email directly, view it on GitHub https://github.com/marianux/ecg-kit/issues/21#issuecomment-1366541100, or unsubscribe https://github.com/notifications/unsubscribe-auth/AYHLRQ4LJHSDX74EDH2YP7DWPQH6HANCNFSM6AAAAAATJFEYJQ . You are receiving this because you authored the thread.Message ID: @.***>

marianux / ecg-kit

Error using mex (line 206) Unable to complete successfully. #21