Open ndim opened 2 years ago
I have not tested the openeizo driver with the EV2495, but here is the USB descriptor, at least when the EV2495 is connected via its Type B jack (I cannot test its Type C connector):
Bus 002 Device 010: ID 056d:405e EIZO Corp. EIZO USB HID Monitor Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x056d EIZO Corp. idProduct 0x405e bcdDevice 80.01 iManufacturer 1 EIZO corporation iProduct 2 EIZO USB HID Monitor iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0022 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 185 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 2 Device Status: 0x0001 Self Powered
I have not tested the openeizo driver with the EV2495, but here is the USB descriptor, at least when the EV2495 is connected via its Type B jack (I cannot test its Type C connector):