search

markmaker / PushPullFeeder

All 3d-Printed Tape&Reel Feeder
GNU General Public License v3.0
71 stars 32 forks source link

Provide basic stl files for 8mm #5

Closed noeldum closed 3 years ago

noeldum commented 3 years ago

Great project. It would be nice to provide some stl file for the basic setup in 8mm. That would make your project more accessible to all of us.

Opening openscad for the first time in my life and would prefer just printing it for testing before spending time to learn openscad.

Managed to get all parts in one stl but struggling to split them into several individual stl files.

markmaker commented 3 years ago

Hi @noeldum

Great project.

Thanks.

It would be nice to provide some stl file for the basic setup in 8mm.

I don't think that'll work. You really need to adjust the play etc. for your printer/filament. That adjustment is the price you need to pay for it to work without using screws etc.

before spending time to learn openscad.

You don't really need to know OpenSCAD. You just set the parameters in the Customizer. Watch the video.

Managed to get all parts in one stl but struggling to split them into several individual stl files.

You can enable individual parts there.

Sorry for the short answer, gotta go now.

_Mark

markmaker commented 3 years ago

The essential tuning is described here: https://youtu.be/cNCjjvCT4Fc?t=78

I'll close this issue for now. If I'm missing the point here, why I should still provide STL files, we can re-open it.

_Mark