search

markniu / Bed_Distance_sensor

Auto bed level with High resolution distance sensor
281 stars 28 forks source link

re:Beta, after running 'install_BDsensor.sh', firmware compilation fails with Error 255 #113

Closed m3hrz4d closed 7 months ago

m3hrz4d commented 7 months ago

I cloned the repo, then successfully ran 'klipper_Beta/install_BDsensor.sh', but when trying to compile firmware, it fails just before the end with Error 255" Any ideas that could point me in the right direction?

make
Using default symbol values (no '/home/sonic/klipper/.config')
Configuration saved to '/home/sonic/klipper/.config'
  Creating symbolic link out/board
Loaded configuration '/home/sonic/klipper/.config'
Configuration saved to '/home/sonic/klipper/.config'
  Creating symbolic link out/board
  Creating symbolic link out/board
  Building out/autoconf.h
  Compiling out/src/sched.o
  Compiling out/src/command.o
  Compiling out/src/basecmd.o
  Compiling out/src/debugcmds.o
  Compiling out/src/initial_pins.o
  Compiling out/src/gpiocmds.o
  Compiling out/src/stepper.o
  Compiling out/src/endstop.o
  Compiling out/src/trsync.o
  Compiling out/src/adccmds.o
  Compiling out/src/spicmds.o
  Compiling out/src/sdiocmds.o
  Compiling out/src/i2ccmds.o
  Compiling out/src/pwmcmds.o
  Compiling out/src/buttons.o
  Compiling out/src/tmcuart.o
  Compiling out/src/neopixel.o
  Compiling out/src/pulse_counter.o
  Compiling out/src/lcd_st7920.o
  Compiling out/src/lcd_hd44780.o
  Compiling out/src/spi_software.o
  Compiling out/src/i2c_software.o
  Compiling out/src/thermocouple.o
  Compiling out/src/sensor_adxl345.o
  Compiling out/src/sensor_angle.o
  Compiling out/src/sensor_mpu9250.o
  Compiling out/src/sensor_lis2dw.o
  Compiling out/src/sensor_ldc1612.o
  Compiling out/src/sensor_bulk.o
  Compiling out/src/BD_sensor.o
  Compiling out/src/stm32/watchdog.o
  Compiling out/src/stm32/gpio.o
  Compiling out/src/stm32/clockline.o
  Compiling out/src/stm32/dfu_reboot.o
  Compiling out/src/generic/crc16_ccitt.o
  Compiling out/src/generic/armcm_boot.o
  Compiling out/src/generic/armcm_irq.o
  Compiling out/src/generic/armcm_reset.o
  Compiling out/src/../lib/stm32f4/system_stm32f4xx.o
  Compiling out/src/stm32/stm32f4.o
  Compiling out/src/generic/armcm_timer.o
  Compiling out/src/stm32/gpioperiph.o
  Compiling out/src/stm32/adc.o
  Compiling out/src/stm32/i2c.o
  Compiling out/src/stm32/spi.o
  Compiling out/src/stm32/sdio.o
  Compiling out/src/stm32/serial.o
  Compiling out/src/generic/serial_irq.o
  Compiling out/src/stm32/hard_pwm.o
  Building out/compile_time_request.o
Too many message ids
make: *** [Makefile:84: out/compile_time_request.o] Error 255
markniu commented 7 months ago

hello, you can try this https://github.com/markniu/Bed_Distance_sensor/issues/47#issuecomment-1825045187

m3hrz4d commented 7 months ago

that fixed the issue! thank you!