search

markqvist / Sideband

LXMF client for Android, Linux and macOS allowing you to communicate with people or LXMF-compatible systems over Reticulum networks using LoRa, Packet Radio, WiFi, I2P, or anything else Reticulum supports.
Other
391 stars 27 forks source link

lora32 2.1 Not receiving data #36

Closed grampae closed 11 months ago

grampae commented 11 months ago

I don't usually post issues however I did search through closed and open issues. I purchased two lilygo lora32 2.1 devices hoping to use sideband. I followed the directions to setup two andoid devices over bluetooth at https://unsigned.io/guides/2023_01_19_RNode_Bluetooth_Setup_In_Sideband_On_Android.html . Over wifi works fine and i can send and receive messages.

With the latest rnode firmware 1.68 on both devices while using sideband, I can send out announcements however the other device never receives them, when checking 'Connectivity Status' it shows RNode On-air and Out: has traffic however In: traffic is always 0. I feel like I must be missing an important step but I think I followed all of the steps in the above link.

I had both android sideband instances set to the same parameters for 915.0mhz etc

[20:19:53] Device info: [20:19:53] Product : LilyGO LoRa32 v2.1 850 - 950 MHz (b1:b9:37) [20:19:53] Device signature : Validated - Local signature [20:19:53] Firmware version : 1.68 [20:19:53] Hardware revision : 1 [20:19:53] Serial number : 00:00:00:03 [20:19:53] Frequency range : 850.0 MHz - 950.0 MHz [20:19:53] Max TX power : 17 dBm [20:19:53] Manufactured : 2023-12-25 15:51:59 [20:19:53] Device mode : Normal (host-controlled)

markqvist commented 11 months ago

Closed due to not following Contribution Guidelines. Do not use the issue tracker to ask questions and support requests.