search

markruys / gw2pvo

GoodWe to PVOutput
MIT License
45 stars 29 forks source link

Add Temperature to the upload data #55

Closed muzzak123 closed 3 years ago

muzzak123 commented 3 years ago

Hi, just got my new system installed and this is perfect to upload my Goodwe data to PVOutput. Thanks for doing this. It was so easy to install and great detailed instructions. Just a comment/improvement. My inverter produces temperature data and I can't see anyway to upload it using gw2pvo. Is there a config I can change to do this ?

eNeRGy164 commented 3 years ago

The current design is that the temperature coming from the invertor is not the outside ambient temperature, as intended by PVOutput, but the temperature of the inverter itself, which is much higher. Therefore, there is only the option to configure a Weather API to get the ambient temperature, and no option to pass the inverter temperature.

muzzak123 commented 3 years ago

I'm pretty sure you can use either. See this post [Temperature Displaying] https://forum.pvoutput.org/t/temperature-displaying/532 The last bit says ...

To use weather temperature then disable the solaredge temperature as per the above setting. To use inverter temperature then remove the weather station details.

muzzak123 commented 3 years ago

Doesn't matter. I've found another way to do it. Thanks