search

marq24 / ha-tibber-pulse-local

Local/LAN Tibber Pulse IR/Bridge Integration for Home Assistant. My Tibber invitation Link: https://invite.tibber.com/6o0kqvzf (Code: six, oscar, zero, kilo, quebec, victor, zulu, foxtrot)
Apache License 2.0
114 stars 4 forks source link

Error: Communicating via an not-yet-implemented protocol #24

Closed carp3-noctem closed 8 months ago

carp3-noctem commented 8 months ago

Hi,

when try to setup the local Integration I get the following message, so I go ahead and create the issue ;-) image

In the Logfiles the following lines where found: 2024-03-03 17:18:54.203 INFO (MainThread) [custom_components.tibber_local] restarting TibberLocalBridge integration... for host: '192.168.0.44' node: '1' com_mode: '3' with options: None 2024-03-03 17:18:54.391 WARNING (MainThread) [custom_components.tibber_local] access to bridge failed with exception: 404, message='Not Found', url=URL('http://192.168.0.44/node_params.json?node_id=1') 2024-03-03 17:18:54.391 DEBUG (MainThread) [custom_components.tibber_local] detect_com_mode: after detect_com_mode_from_node_param27 mode is: -1 2024-03-03 17:18:54.391 DEBUG (MainThread) [custom_components.tibber_local] detect_com_mode is -1: will try to read 99 2024-03-03 17:18:54.426 WARNING (MainThread) [custom_components.tibber_local] access to bridge failed with exception: 404, message='Not Found', url=URL('http://192.168.0.44/data.json?node_id=1') 2024-03-03 17:18:54.426 DEBUG (MainThread) [custom_components.tibber_local] detect_com_mode 1 is -1: 99 failed - will try to read 3 2024-03-03 17:18:54.463 WARNING (MainThread) [custom_components.tibber_local] access to bridge failed with exception: 404, message='Not Found', url=URL('http://192.168.0.44/data.json?node_id=1') 2024-03-03 17:18:54.463 DEBUG (MainThread) [custom_components.tibber_local] detect_com_mode 2 is -1: 99 failed and 3 failed 2024-03-03 17:18:54.463 ERROR (MainThread) [custom_components.tibber_local.config_flow] Could not connect to Tibber Pulse Bridge at 192.168.0.44, check host ip address 2024-03-03 17:22:11.565 INFO (MainThread) [custom_components.tibber_local] restarting TibberLocalBridge integration... for host: '192.168.0.44' node: '1' com_mode: '3' with options: None 2024-03-03 17:22:11.676 WARNING (MainThread) [custom_components.tibber_local] access to bridge failed with exception: 404, message='Not Found', url=URL('http://192.168.0.44/node_params.json?node_id=1') 2024-03-03 17:22:11.676 DEBUG (MainThread) [custom_components.tibber_local] detect_com_mode: after detect_com_mode_from_node_param27 mode is: -1 2024-03-03 17:22:11.676 DEBUG (MainThread) [custom_components.tibber_local] detect_com_mode is -1: will try to read 99 2024-03-03 17:22:11.730 WARNING (MainThread) [custom_components.tibber_local] access to bridge failed with exception: 404, message='Not Found', url=URL('http://192.168.0.44/data.json?node_id=1') 2024-03-03 17:22:11.731 DEBUG (MainThread) [custom_components.tibber_local] detect_com_mode 1 is -1: 99 failed - will try to read 3 2024-03-03 17:22:11.774 WARNING (MainThread) [custom_components.tibber_local] access to bridge failed with exception: 404, message='Not Found', url=URL('http://192.168.0.44/data.json?node_id=1') 2024-03-03 17:22:11.774 DEBUG (MainThread) [custom_components.tibber_local] detect_com_mode 2 is -1: 99 failed and 3 failed 2024-03-03 17:22:11.774 ERROR (MainThread) [custom_components.tibber_local.config_flow] Could not connect to Tibber Pulse Bridge at 192.168.0.44, check host ip address 2024-03-03 17:22:14.498 INFO (MainThread) [custom_components.tibber_local] restarting TibberLocalBridge integration... for host: '192.168.0.44' node: '1' com_mode: '3' with options: None 2024-03-03 17:22:14.651 WARNING (MainThread) [custom_components.tibber_local] access to bridge failed with exception: 404, message='Not Found', url=URL('http://192.168.0.44/node_params.json?node_id=1') 2024-03-03 17:22:14.652 DEBUG (MainThread) [custom_components.tibber_local] detect_com_mode: after detect_com_mode_from_node_param27 mode is: -1 2024-03-03 17:22:14.652 DEBUG (MainThread) [custom_components.tibber_local] detect_com_mode is -1: will try to read 99 2024-03-03 17:22:14.693 WARNING (MainThread) [custom_components.tibber_local] access to bridge failed with exception: 404, message='Not Found', url=URL('http://192.168.0.44/data.json?node_id=1') 2024-03-03 17:22:14.693 DEBUG (MainThread) [custom_components.tibber_local] detect_com_mode 1 is -1: 99 failed - will try to read 3 2024-03-03 17:22:14.725 WARNING (MainThread) [custom_components.tibber_local] access to bridge failed with exception: 404, message='Not Found', url=URL('http://192.168.0.44/data.json?node_id=1') 2024-03-03 17:22:14.726 DEBUG (MainThread) [custom_components.tibber_local] detect_com_mode 2 is -1: 99 failed and 3 failed 2024-03-03 17:22:14.726 ERROR (MainThread) [custom_components.tibber_local.config_flow] Could not connect to Tibber Pulse Bridge at 192.168.0.44, check host ip address

But the Device is reachable when surfing to it's IP: Bildschirmfoto

carp3-noctem commented 8 months ago

I did found that my Bridge don't use /node/1/data, it uses /node/2/data and has the following Output: image

marq24 commented 8 months ago

When it's node 2, then simply make use of the "expert-setting" in the Integration setup dialog and enter your node 2 (replace the default node 1)

carp3-noctem commented 8 months ago

Stupid me, overseen this option. But also found that a few minutes later then original :-D

Thanks for the great Work, Issue closed as it is working with node 2 setting

marq24 commented 8 months ago

I just enhanced the error message (to avoid such a situation in the future) thanks for mention this issue!