search

marq24 / ha-waterkotte

HACS integration for Waterkotte Heatpumps that can communicate locally via HTTP [build since 2018] - Supporting 'Geothermal Energy' as well as 'Air Source External Devices'. If you have any questions please don't hesitate to create a Issue or start a new Discussion @ github. Thanks in advance for supporting my work.
MIT License
11 stars 1 forks source link

Allow setting target source-in temp. in cool-mode #15

Closed devfaz closed 3 months ago

devfaz commented 3 months ago

Description

Hello,

as using a DeltaT for Source-pump control in cooling-mode tends to hit the "min allowed temp"-alert for source-in-temp at the beginning of the sommer.

Thats the reason why I run the "target temperature"-mode for the source-pump in cooling mode.

It would be nice to be able to set the "target source-in temp." dynamically based on the current dewpoint to avoid having any water dripping on the pipes :)

According to the WebUI its:

http://waterkotte/cgi/writeTags?returnValue=true&n=1&t1=A1034&v1=181&_=1719582684952

Setting the value to 18.1*C

Thx a lot :)

List of tags

No response

marq24 commented 3 months ago

So a option to set 'T Wärmequelle' ... should not be too complicated to add this one...

marq24 commented 3 months ago

it will take a bit longer - since I want to add also other sensors from this section... [at least the heating/cooling SourcePump Setting]

marq24 commented 3 months ago

see new release - and please close this if it's solved ;-)

devfaz commented 3 months ago

Thx a lot! Works like a charm :)