search

martinville / solarsynkv2

Addon to integrate your Sunsynk account with home assistant.
MIT License
18 stars 10 forks source link

House with second solar source shows feed wrong way #19

Closed rkflyer closed 2 weeks ago

rkflyer commented 2 months ago

I have two solar sources, Primary one is via a Fox HA10.5 which displays perfectly. I also have a secondary source which I show as an additional load to the house, this displays a negative value which is the value from the second Victron inverter.

It's a small system and normally supplies less than the house load with a small 100w ish coming from the Fox inverter to supplement the house load. When this happens the dots flow in the correct direction.

However, when the secondary source is greater than the house load there is a negative value feeding from the house load but the dots still flow towards the house.

Minor issue but would be a nice fix if possible.

martinville commented 2 weeks ago

Hi There.

I dont think this is something I can assist with the Addon merely fetch and send values as it get it. It does not apply any logic to what ever it received from the sunsynk server.

Is this not perhaps an issue with the Card you are using ?

rkflyer commented 2 weeks ago

Hi

Thank you for your comment but I now realise I posted this against the wrong repository.

It should have been on the slipx06/sunsynk-power-flow-card one not this add-on. Sorry!

rkflyer commented 2 weeks ago

Wrong repository