search

martomi / chiadog

A watch dog providing a peace in mind that your Chia farm is running smoothly 24/7.
MIT License
457 stars 120 forks source link

How to finfd those plots that took longer than 5 sec.? #234

Closed jkoenig72 closed 3 years ago

jkoenig72 commented 3 years ago

Hi,

thansk for proviging this nice tool. Really like it.

Just need some hints how to improve my setup -

I get lots of those alerts >5 sec, normally in the range of 20 - 30 sec., how can I see which plot is responsible for that?

Also - those numbers above, are they in general ok? Have not got any chia so far, just wondering if this is bad luck or the setup is weak.

Any feedback?

Regards Joerg

pieterhelsen commented 3 years ago

This is usually not so much a problem with your plots (though you can run chia plots check just to be sure), but rather a problem with your hardware setup.

Are you plotting and farming at the same time? For a farm that size, it is recommended to split that up into two separate instances.

jkoenig72 commented 3 years ago

Hi,

thanks for coming back to me...

I have that split up. Using a hp ProLiant dl580 for the farming, I switched off the plotting on that machine. plots are on HDDs, mostly sata / usb3, all directly connected to that machine and mounted each disk into an extra folder. Two external shares I have mounted via nfs (synology and some other hp proliant server), so wondering where I can see what plots causing those warnings... can't be sata, can't be usb3 - its maybe the Synology....

Any idea how I can find out?

jkoenig72 commented 3 years ago

I will remove those 2 nfs shares and see if those warnings will go away...

On Thu, 10 Jun 2021 at 10:01, Joerg Koenig @.***> wrote:

Hi,

thanks for coming back to me...

I have that split up. Using a hp ProLiant dl580 for the farming, I switched off the plotting on that machine. plots are on HDDs, mostly sata / usb3, all directly connected to that machine and mounted each disk into an extra folder. Two external shares I have mounted via nfs (synology and some other hp proliant server), so wondering where I can see what plots causing those warnings... can't be sata, can't be usb3 - its maybe the Synology....

Any idea how I can find out?

pieterhelsen commented 3 years ago

In the Chia log you'll find entries such as 

2021-06-10T10:05:13.146 harvester chia.harvester.harvester: INFO     0 plots were eligible for farming 8f9e872de0... Found 0 proofs. Time: 0.10962 s. Total 134 plots

So in the default 'INFO' log you won't be able to find which plots specifically have been searched. You can try setting the log level for Chia to DEBUG instead; this might output which plots are searched. chia configure -log_level DEBUG

jkoenig72 commented 3 years ago

Thanks!

On Thu, 10 Jun 2021 at 10:10, pieterhelsen @.***> wrote:

In the Chia log you'll find entries such as

2021-06-10T10:05:13.146 harvester chia.harvester.harvester: INFO 0 plots were eligible for farming 8f9e872de0... Found 0 proofs. Time: 0.10962 s. Total 134 plots

So in the default 'INFO' log you won't be able to find which plots specifically have been searched. You can try setting the log level for Chia to DEBUG instead; this might output which plots are searched. chia configure -log_level DEBUG

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/martomi/chiadog/issues/234#issuecomment-858410334, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACKKCKUUMFDOE5LKZGEJ6HDTSBXPBANCNFSM46NQCG6A .

jkoenig72 commented 3 years ago

I removed the nfs shares - no warnings... I guess it's the synology. pretty old...

On Thu, 10 Jun 2021 at 10:15, Joerg Koenig @.***> wrote:

Thanks!

On Thu, 10 Jun 2021 at 10:10, pieterhelsen @.***> wrote:

In the Chia log you'll find entries such as

2021-06-10T10:05:13.146 harvester chia.harvester.harvester: INFO 0 plots were eligible for farming 8f9e872de0... Found 0 proofs. Time: 0.10962 s. Total 134 plots

So in the default 'INFO' log you won't be able to find which plots specifically have been searched. You can try setting the log level for Chia to DEBUG instead; this might output which plots are searched. chia configure -log_level DEBUG

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/martomi/chiadog/issues/234#issuecomment-858410334, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACKKCKUUMFDOE5LKZGEJ6HDTSBXPBANCNFSM46NQCG6A .

jkoenig72 commented 3 years ago

Seems also important to keep those machines (if they are a bit old) "clean" of heavy work, like running docker or something. Just sharing the files.

On Thu, 10 Jun 2021 at 10:16, Joerg Koenig @.***> wrote:

I removed the nfs shares - no warnings... I guess it's the synology. pretty old...

On Thu, 10 Jun 2021 at 10:15, Joerg Koenig @.***> wrote:

Thanks!

On Thu, 10 Jun 2021 at 10:10, pieterhelsen @.***> wrote:

In the Chia log you'll find entries such as

2021-06-10T10:05:13.146 harvester chia.harvester.harvester: INFO 0 plots were eligible for farming 8f9e872de0... Found 0 proofs. Time: 0.10962 s. Total 134 plots

So in the default 'INFO' log you won't be able to find which plots specifically have been searched. You can try setting the log level for Chia to DEBUG instead; this might output which plots are searched. chia configure -log_level DEBUG

— You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub https://github.com/martomi/chiadog/issues/234#issuecomment-858410334, or unsubscribe https://github.com/notifications/unsubscribe-auth/ACKKCKUUMFDOE5LKZGEJ6HDTSBXPBANCNFSM46NQCG6A .