I've run into an issue on a RockPi 4b board.
After flashing the latest release onto a 16GB EMMC and booting the RockPi with it it's taking a while until the screen turns on for a few seconds.
It states there that some setup has been done and the device will be restarted.
On second boot i don't get any screen at all. Display stays off and i've waited some 10 minutes. The red LED indicating drive activity long stopped blinking.
Then i connected serial console to CoolTerm and inspected the output. It ends at system login prompt where i can't find passwords for.
I've run into an issue on a RockPi 4b board. After flashing the latest release onto a 16GB EMMC and booting the RockPi with it it's taking a while until the screen turns on for a few seconds. It states there that some setup has been done and the device will be restarted. On second boot i don't get any screen at all. Display stays off and i've waited some 10 minutes. The red LED indicating drive activity long stopped blinking.
Then i connected serial console to CoolTerm and inspected the output. It ends at system login prompt where i can't find passwords for.
`R-CADE 4K RETRO GAMING MEDIA CENTER SOLUTION
RCADE login:`
I'll share the output if this helps: rcade-init.txt