This will enter adb shell and make the "parted" binary you pushed to your device earlier executable.
Step 5:
Now run the command
Code:
./parted /dev/block/mmcblk0 p
rename cust to vendor
./parted /dev/block/mmcblk0 name 36 vendor
rechek to verify
./parted /dev/block/mmcblk0 pcomplete
raw data
Jun 6, 2018 at 2:05 AM
#1
I got tired of installing amazing ROMs created by the talented folks here on XDA, but being held back on things like Google Apps because of the tiny /system partition we have on the Nexus 4. I looked around and found guides to increase the system space in the Nexus 5 and Nexus 7 2013, so I basically just adapted them to work on our beloved Nexus 4.
As always, do this at your OWN risk. I am not responsible for bricking your Nexus 4. I will simply list the process which I used to increase my Nexus 4's system partition (by taking a big ol' chunk from the cache partition). Remember, any sort of modification to your device of this caliber WILL void any warranty you might still have.
REQUIREMENTS:
parted (Uploaded to my Google Drive. If it downloads as a .txt, rename it to remove the extension and make it a plain file)
adb and fastboot, and preferably knowledge on how they work
Step 1: Install TWRP onto your Nexus 4 and reboot into it.
Step 2: Open up command prompt / terminal and check to see if your Nexus 4 is connected properly with "adb devices".
Step 3: Once you've confirmed that adb is fully working and your Nexus 4 is properly connected to your PC, download parted and use adb to push it to your Nexus 4 using the command:
Code:
adb push parted /
Step 4: Now enter the following command:
Code:
adb shell
and then the command:
Code:
chmod +x parted
This will enter adb shell and make the "parted" binary you pushed to your device earlier executable.
Step 5:
Now run the command
Code:
./parted /dev/block/mmcblk0 p
You should see a long list with a bunch of numbers and names in your terminal. These are the partitions on your device. parted will give you the partition number, the "start" and "end" of the partition, the size, and the name.
This is the partition layout on my device. It will probably be the same on your device, though the size of userdata may vary depending on whether you have the 8gb or 16gb Nexus 4.
Step 6:
Now run the following three commands:
Code:
umount /data
umount /sdcard
umount /cache
Step 7: So, on my Nexus 4, the system partition is number 21, and cache is 22. We're kinda lucky in the fact that system and cache are right next to each other, meaning we don't have to touch any other partition.
You'll want to run these two next commands. These commands will essentially "remove" the two partitions.
Step 8: Now it is time to recreate these two partitions, however, when recreating them, we will make system bigger and the cache smaller. From the partitions list we got in Step 5, we can see that system starts at 159 and ends at 1040, while cache starts at 1040 and ends at 1627. The following two commands will rebuild /system starting at 159, but ending at 1590, while rebuilding cache at 1590, and ending at 1627. We are essentially stealing a large chunk from cache, since we don't really need that anymore on newer ROMs.
This will bring up the partitions list, or table, again. This time, however, we'll see the new partitions where system and cache were, however, they have no names! The following two commands will name the two partitions again.
Code:
./parted /dev/block/mmcblk0 name 21 system
./parted /dev/block/mmcblk0 name 22 cache
Step 10: Great! Now the partitions should be named again! Now, we still have to format the partitions as ext4 so that we can actually use them. The following two commands will do that for you.
Step 11: At this point, feel free to run the command from Step 5 to take one more look at the partition table and make sure everything looks good. Now run the command
Code:
mount -a
and then type in
Code:
exit
.
Step 12: Now we are pretty much done. We've extended the system partition from approx. 881mb to 1431mb, which is a nice large chunk of memory. In the future, we could always mess with the partitions more to add even more space by stealing from userdata, but until we reach that point, I think we are pretty well set for now!
Now...
You'll want to reboot TWRP, and flash a new ROM. You can now use a much bigger Google Apps package, without any worries.
Do note, however, that flashing a ROM will "resize" system to be smaller, but this isn't a huge deal. After flashing a ROM, while still in TWRP, you'll want to go to Wipe > Advanced Wipe > check "system" then head to "Repair or Change File System", > then tap on "Resize File System." If you encounter any errors while trying to resize, try remounting system or rebooting TWRP. Afterwards, you should be able to flash your Google Apps package. I'm not sure if you need to repeat these steps after flashing things other than ROMs, but repeating this process within TWRP should work just as well.
I hope I helped y'all out and feel free to post if this guide worked for you or if you have any other comments!
CREDITS:
@surfrock66 for his Nexus 5 guide here.
@rkhat for his Nexus 7 2013 guide here.
mathew-dennis
commented
3 years ago 
rename cust to vendor
https://forum.xda-developers.com/t/guide-increase-your-nexus-4s-system-partition-for-more-space.3800264/
downlad and unzip --> parted_gdisk_fdisk_mkfs.ext4-AARCH64.zip
Code:
adb push parted /Step 4: Now enter the following command: Code:
adb shell
and then the command: Code:
chmod +x partedThis will enter adb shell and make the "parted" binary you pushed to your device earlier executable.
Step 5: Now run the command Code:
./parted /dev/block/mmcblk0 prename cust to vendor
./parted /dev/block/mmcblk0 name 36 vendorrechek to verify
./parted /dev/block/mmcblk0 pcompleteraw data
I got tired of installing amazing ROMs created by the talented folks here on XDA, but being held back on things like Google Apps because of the tiny /system partition we have on the Nexus 4. I looked around and found guides to increase the system space in the Nexus 5 and Nexus 7 2013, so I basically just adapted them to work on our beloved Nexus 4.
As always, do this at your OWN risk. I am not responsible for bricking your Nexus 4. I will simply list the process which I used to increase my Nexus 4's system partition (by taking a big ol' chunk from the cache partition). Remember, any sort of modification to your device of this caliber WILL void any warranty you might still have.
REQUIREMENTS: parted (Uploaded to my Google Drive. If it downloads as a .txt, rename it to remove the extension and make it a plain file) adb and fastboot, and preferably knowledge on how they work
Step 1: Install TWRP onto your Nexus 4 and reboot into it.
Step 2: Open up command prompt / terminal and check to see if your Nexus 4 is connected properly with "adb devices".
Step 3: Once you've confirmed that adb is fully working and your Nexus 4 is properly connected to your PC, download parted and use adb to push it to your Nexus 4 using the command:
Code:
adb push parted /
Step 4: Now enter the following command: Code:
adb shell
and then the command: Code:
chmod +x parted
This will enter adb shell and make the "parted" binary you pushed to your device earlier executable.
Step 5: Now run the command Code:
./parted /dev/block/mmcblk0 p
You should see a long list with a bunch of numbers and names in your terminal. These are the partitions on your device. parted will give you the partition number, the "start" and "end" of the partition, the size, and the name. This is the partition layout on my device. It will probably be the same on your device, though the size of userdata may vary depending on whether you have the 8gb or 16gb Nexus 4.
Step 6: Now run the following three commands: Code:
umount /data umount /sdcard umount /cache
Step 7: So, on my Nexus 4, the system partition is number 21, and cache is 22. We're kinda lucky in the fact that system and cache are right next to each other, meaning we don't have to touch any other partition.
You'll want to run these two next commands. These commands will essentially "remove" the two partitions.
Code:
./parted /dev/block/mmcblk0 rm 21 ./parted /dev/block/mmcblk0 rm 22
Step 8: Now it is time to recreate these two partitions, however, when recreating them, we will make system bigger and the cache smaller. From the partitions list we got in Step 5, we can see that system starts at 159 and ends at 1040, while cache starts at 1040 and ends at 1627. The following two commands will rebuild /system starting at 159, but ending at 1590, while rebuilding cache at 1590, and ending at 1627. We are essentially stealing a large chunk from cache, since we don't really need that anymore on newer ROMs.
Code:
./parted /dev/block/mmcblk0 mkpart primary 159 1590 ./parted /dev/block/mmcblk0 mkpart primary 1590 1627
Step 9: Now run this command: Code:
./parted /dev/block/mmcblk0 p
This will bring up the partitions list, or table, again. This time, however, we'll see the new partitions where system and cache were, however, they have no names! The following two commands will name the two partitions again.
Code:
./parted /dev/block/mmcblk0 name 21 system ./parted /dev/block/mmcblk0 name 22 cache
Step 10: Great! Now the partitions should be named again! Now, we still have to format the partitions as ext4 so that we can actually use them. The following two commands will do that for you.
Code:
mke2fs -b 4096 -T ext4 /dev/block/mmcblk0p21 mke2fs -b 4096 -T ext4 /dev/block/mmcblk0p22
Step 11: At this point, feel free to run the command from Step 5 to take one more look at the partition table and make sure everything looks good. Now run the command Code:
mount -a
and then type in Code:
exit
.
Step 12: Now we are pretty much done. We've extended the system partition from approx. 881mb to 1431mb, which is a nice large chunk of memory. In the future, we could always mess with the partitions more to add even more space by stealing from userdata, but until we reach that point, I think we are pretty well set for now!
Now... You'll want to reboot TWRP, and flash a new ROM. You can now use a much bigger Google Apps package, without any worries. Do note, however, that flashing a ROM will "resize" system to be smaller, but this isn't a huge deal. After flashing a ROM, while still in TWRP, you'll want to go to Wipe > Advanced Wipe > check "system" then head to "Repair or Change File System", > then tap on "Resize File System." If you encounter any errors while trying to resize, try remounting system or rebooting TWRP. Afterwards, you should be able to flash your Google Apps package. I'm not sure if you need to repeat these steps after flashing things other than ROMs, but repeating this process within TWRP should work just as well.
I hope I helped y'all out and feel free to post if this guide worked for you or if you have any other comments! CREDITS: @surfrock66 for his Nexus 5 guide here. @rkhat for his Nexus 7 2013 guide here.