search

mathiasvr / bluejay

:bird: Digital ESC firmware for controlling brushless motors in multirotors
GNU General Public License v3.0
478 stars 48 forks source link

Arming stopped after flashing v14 #49

Closed jamesd3rd closed 2 years ago

jamesd3rd commented 2 years ago

I flashed my Diatone Mamba f50 BLHeli_S esc tonight and now the quad won't arm. I initially used v15 then went to v14 thinking an older version wouldn't be buggy and just work. . Should I be looking at the minimum startup value? Right now I'm using Dshot 600. Should I go down to 300?

mathiasvr commented 2 years ago

Does it work without bidirectional dshot? What size motors are you using? PWM frequency? Does the FC not arm or is the motors just not spinning?

jamesd3rd commented 2 years ago

There is no issue. I've resolved the problem. I had the smoke stopper plugged in and it limits the current. Once I disconnected it, things were fine. I don't normally leave it plugged in after the initial check for shorts. So I take it for granted because it's typically not plugged in when I check the motors without BF connected.