I think I posted this before you merged the OVBSC into the STC1000p branch.
The main reason for this request is the difficulty maintaining mash out temp (even with insulation) on the Grainfather. With their recipes they tell you to switch the boiler from the Mash (500w) setting to the Normal (2000w) setting during mash out.
My suggestion is that for each mash step you have a three options, eg:
Hi Mats,
I think I posted this before you merged the OVBSC into the STC1000p branch.
The main reason for this request is the difficulty maintaining mash out temp (even with insulation) on the Grainfather. With their recipes they tell you to switch the boiler from the Mash (500w) setting to the Normal (2000w) setting during mash out.
My suggestion is that for each mash step you have a three options, eg:
Po1 settings would be s,p,h,b as follows:
Cheers,
Kal