search

matthiasbock / Altium-Libraries

Symbols, footprints and 3d models for use with Altium Designer
46 stars 19 forks source link

Add footprint for microSD socket #7

Closed matthiasbock closed 8 months ago

matthiasbock commented 8 years ago

microsd footprint microsd measurements

matthiasbock commented 8 years ago

Possible 3D models:

DRSDavidSoft commented 12 months ago
Micro SD Card, TF Card, Memory Card Connector, 9-Leads, Body 16.44x15.6 mm, 1.4mm Profile SMT, Push-Push (MEM2055/MEM2075) image
Library: 📦 MicroSD_Connector.zip – Download 1.90MB (Contains PcbLib + SchLib)

This is the best I was able to do with the dimensions that you provided. At first the footprint would match MEM2075, but it appears the mounting holes differ between these parts.

Here's the results, below. It looks to nicely fit the footprint, however the SH pads (identified as G in the drawing above) might need to be expanded if the socket is soldered by hand. In my case I was a bit space restraint so I only added a margin of .2mm for the solder.

Left-side and Right-side

Top and Bottom

I didn't make a PR because I wasn't sure if this repo was maintained. If so, please feel free to include this footprint in your library. I release it under the same GPL-3 that it used by you. Similarly, the included steps might be copyrighted, I'm not sure.

image
matthiasbock commented 8 months ago

This is awesome! Thank you for your contribution!