Open drandyhaas opened 2 years ago
The installation for pyems itself should be fairly straightforward. However, installing openems is non-trivial. Have you taken a look at the installation instructions for that? You'll also need the python bindings. If you run into any trouble I would check out the openems forum. I can think about improving the installation instructions for pyems, but this may end up just being links to openems's instructions, since I don't want to duplicate the information already presented there.
This has only been tested on Linux and should work on any distribution, though I've only tested it on Ubuntu and Nix. If you want to use nix (you can use the package manager standalone without the distribution if you want), the installation should be trivial as I've already done the work of packaging up everything. I can provide more details if you're interested.
I'd like this to work on Windows (and I can't think of any fundamental reason why it shouldn't work, since openems supports it), but I don't use Windows myself and don't have the time to do extensive development for that. But, I would accept bug reports for Windows incompatibilities. I think it should be fairly simple to make pyems Windows-compatible.
I have a openems installation in windows under conda environment. However, I tried pyems installation by pip, conda and python setup. In all cases, I endup with either simulation package not found or some other package not found error. Any indication of what is going wrong will be helpful.
Can you provide me with more detail about the commands you're running and the error messages you get?
I'm using the coax example as a test. The output error in jupyter I'm getting is
C:\Users\cqtmukhe\.conda\envs\Py10_env\Lib\site-packages\pyems-0.1.0-py3.11.egg\pyems\mesh.py:664: UserWarning: Mesh line at pos -2.5676 for dimension 1 violates smoothness. Smoothness was set to 1.50 but this line creates a spacing with factor 1.86. For convenience the last three lines are: -2.6076, -2.5816 and -2.5676.
C:\Users\cqtmukhe\.conda\envs\Py10_env\Lib\site-packages\pyems-0.1.0-py3.11.egg\pyems\mesh.py:664: UserWarning: Mesh line at pos 2.6076 for dimension 1 violates smoothness. Smoothness was set to 1.50 but this line creates a spacing with factor 1.86. For convenience the last three lines are: 2.5676, 2.5816 and 2.6076.
C:\Users\cqtmukhe\.conda\envs\Py10_env\Lib\site-packages\pyems-0.1.0-py3.11.egg\pyems\mesh.py:664: UserWarning: Mesh line at pos -2.5676 for dimension 2 violates smoothness. Smoothness was set to 1.50 but this line creates a spacing with factor 1.86. For convenience the last three lines are: -2.6076, -2.5816 and -2.5676.
C:\Users\cqtmukhe\.conda\envs\Py10_env\Lib\site-packages\pyems-0.1.0-py3.11.egg\pyems\mesh.py:664: UserWarning: Mesh line at pos 2.6076 for dimension 2 violates smoothness. Smoothness was set to 1.50 but this line creates a spacing with factor 1.86. For convenience the last three lines are: 2.5676, 2.5816 and 2.6076.
---------------------------------------------------------------------------
FileNotFoundError Traceback (most recent call last)
Cell In[1], line 67
64 if os.getenv("_PYEMS_PYTEST"):
65 sys.exit(0)
---> 67 sim.run()
68 sim.view_field()
70 z0 = sim.ports[0].impedance()
File ~\.conda\envs\Py10_env\Lib\site-packages\pyems-0.1.0-py3.11.egg\pyems\simulation.py:173, in Simulation.run(self, csx, debug_pec, threads)
157 """
158 Run simulation.
159
(...)
170 other number uses the number provided.
171 """
172 if csx:
--> 173 self.view_csx(prompt=True)
174 if not self._calc_only:
175 if debug_pec:
File ~\.conda\envs\Py10_env\Lib\site-packages\pyems-0.1.0-py3.11.egg\pyems\simulation.py:192, in Simulation.view_csx(self, prompt)
186 def view_csx(self, prompt: bool = False) -> None:
187 """
188 View the CSX network.
189
190 :param prompt: Prompt user whether to continue simulation.
191 """
--> 192 subprocess.run(["AppCSXCAD", self._csx_path])
193 if prompt:
194 self._prompt_terminate()
File ~\.conda\envs\Py10_env\Lib\subprocess.py:548, in run(input, capture_output, timeout, check, *popenargs, **kwargs)
545 kwargs['stdout'] = PIPE
546 kwargs['stderr'] = PIPE
--> 548 with Popen(*popenargs, **kwargs) as process:
549 try:
550 stdout, stderr = process.communicate(input, timeout=timeout)
File ~\.conda\envs\Py10_env\Lib\subprocess.py:1024, in Popen.__init__(self, args, bufsize, executable, stdin, stdout, stderr, preexec_fn, close_fds, shell, cwd, env, universal_newlines, startupinfo, creationflags, restore_signals, start_new_session, pass_fds, user, group, extra_groups, encoding, errors, text, umask, pipesize, process_group)
1020 if self.text_mode:
1021 self.stderr = io.TextIOWrapper(self.stderr,
1022 encoding=encoding, errors=errors)
-> 1024 self._execute_child(args, executable, preexec_fn, close_fds,
1025 pass_fds, cwd, env,
1026 startupinfo, creationflags, shell,
1027 p2cread, p2cwrite,
1028 c2pread, c2pwrite,
1029 errread, errwrite,
1030 restore_signals,
1031 gid, gids, uid, umask,
1032 start_new_session, process_group)
1033 except:
1034 # Cleanup if the child failed starting.
1035 for f in filter(None, (self.stdin, self.stdout, self.stderr)):
File ~\.conda\envs\Py10_env\Lib\subprocess.py:1509, in Popen._execute_child(self, args, executable, preexec_fn, close_fds, pass_fds, cwd, env, startupinfo, creationflags, shell, p2cread, p2cwrite, c2pread, c2pwrite, errread, errwrite, unused_restore_signals, unused_gid, unused_gids, unused_uid, unused_umask, unused_start_new_session, unused_process_group)
1507 # Start the process
1508 try:
-> 1509 hp, ht, pid, tid = _winapi.CreateProcess(executable, args,
1510 # no special security
1511 None, None,
1512 int(not close_fds),
1513 creationflags,
1514 env,
1515 cwd,
1516 startupinfo)
1517 finally:
1518 # Child is launched. Close the parent's copy of those pipe
1519 # handles that only the child should have open. You need
(...)
1522 # pipe will not close when the child process exits and the
1523 # ReadFile will hang.
1524 self._close_pipe_fds(p2cread, p2cwrite,
1525 c2pread, c2pwrite,
1526 errread, errwrite)
FileNotFoundError: [WinError 2] The system cannot find the file specified
Is AppCSXCAD
in your path? Try executing that on it's own. Otherwise, I wonder if this line is an issue since it uses a forward slash in the path.
Yes AppCSXCAD is in the path as I'm running the openEMS with it native python without any problem. If the forward slash is a problem, what do I need to do?
Thanks for the update, however I still have the problem. Now, I'm doubtful if the appCXSCAD is installed properly. I followed the instruction as in https://docs.openems.de/python/install.html#windows
Do I need to separately install appCSXCAD?
The error I'm getting is
FileNotFoundError Traceback (most recent call last)
Cell In[2], line 67
64 if os.getenv("_PYEMS_PYTEST"):
65 sys.exit(0)
---> 67 sim.run()
68 sim.view_field()
70 z0 = sim.ports[0].impedance()
File ~\.conda\envs\Py10_env\Lib\site-packages\pyems-0.1.0-py3.11.egg\pyems\simulation.py:173, in Simulation.run(self, csx, debug_pec, threads)
157 """
158 Run simulation.
159
(...)
170 other number uses the number provided.
171 """
172 if csx:
--> 173 self.view_csx(prompt=True)
174 if not self._calc_only:
175 if debug_pec:
File ~\.conda\envs\Py10_env\Lib\site-packages\pyems-0.1.0-py3.11.egg\pyems\simulation.py:192, in Simulation.view_csx(self, prompt)
186 def view_csx(self, prompt: bool = False) -> None:
187 """
188 View the CSX network.
189
190 :param prompt: Prompt user whether to continue simulation.
191 """
--> 192 subprocess.run(["AppCSXCAD", self._csx_path])
193 if prompt:
194 self._prompt_terminate()
File ~\.conda\envs\Py10_env\Lib\subprocess.py:548, in run(input, capture_output, timeout, check, *popenargs, **kwargs)
545 kwargs['stdout'] = PIPE
546 kwargs['stderr'] = PIPE
--> 548 with Popen(*popenargs, **kwargs) as process:
549 try:
550 stdout, stderr = process.communicate(input, timeout=timeout)
File ~\.conda\envs\Py10_env\Lib\subprocess.py:1024, in Popen.__init__(self, args, bufsize, executable, stdin, stdout, stderr, preexec_fn, close_fds, shell, cwd, env, universal_newlines, startupinfo, creationflags, restore_signals, start_new_session, pass_fds, user, group, extra_groups, encoding, errors, text, umask, pipesize, process_group)
1020 if self.text_mode:
1021 self.stderr = io.TextIOWrapper(self.stderr,
1022 encoding=encoding, errors=errors)
-> 1024 self._execute_child(args, executable, preexec_fn, close_fds,
1025 pass_fds, cwd, env,
1026 startupinfo, creationflags, shell,
1027 p2cread, p2cwrite,
1028 c2pread, c2pwrite,
1029 errread, errwrite,
1030 restore_signals,
1031 gid, gids, uid, umask,
1032 start_new_session, process_group)
1033 except:
1034 # Cleanup if the child failed starting.
1035 for f in filter(None, (self.stdin, self.stdout, self.stderr)):
File ~\.conda\envs\Py10_env\Lib\subprocess.py:1509, in Popen._execute_child(self, args, executable, preexec_fn, close_fds, pass_fds, cwd, env, startupinfo, creationflags, shell, p2cread, p2cwrite, c2pread, c2pwrite, errread, errwrite, unused_restore_signals, unused_gid, unused_gids, unused_uid, unused_umask, unused_start_new_session, unused_process_group)
1507 # Start the process
1508 try:
-> 1509 hp, ht, pid, tid = _winapi.CreateProcess(executable, args,
1510 # no special security
1511 None, None,
1512 int(not close_fds),
1513 creationflags,
1514 env,
1515 cwd,
1516 startupinfo)
1517 finally:
1518 # Child is launched. Close the parent's copy of those pipe
1519 # handles that only the child should have open. You need
(...)
1522 # pipe will not close when the child process exits and the
1523 # ReadFile will hang.
1524 self._close_pipe_fds(p2cread, p2cwrite,
1525 c2pread, c2pwrite,
1526 errread, errwrite)
FileNotFoundError: [WinError 2] The system cannot find the file specified
AppCSXCAD
is an executable and it needs to be in your path. Try opening a shell and running it on its own (this is what I said in my first message). If your system says the executable can't be found, then it's not installed properly.
As to whether that installation procedure includes AppCSXCAD - I don't know. It's been quite a few years since I performed the installation, and I've never done it for Windows.
Hi, I'm excited about this project, if it really will allow free PCB FDTD EM simulation! I don't understand how to install the python dependencies required. Is this expected to work on Windows, or only in Linux? Or only Ubuntu? It would be great to specify exactly how to install the needed dependencies (and on what platform), and install pyems, in order to get up and running. Thanks!