Closed ThongPhan89 closed 6 years ago
Hello! Are you running it on a model that is saved to disk? Or is it perhaps unsaved? Or maybe in A360?
Sent from my iPhone
On Aug 21, 2017, at 11:15 PM, ThongPhan89 notifications@github.com<mailto:notifications@github.com> wrote:
Dear Matt,
I'm using Metamorphosis with Revit 2016 and it has an error when I use Snapshot. [image]https://user-images.githubusercontent.com/28525991/29547168-b73608cc-8722-11e7-9c44-9d150ba2be8b.png
Please review and check where the false is. Thank you so much!
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHubhttps://github.com/mattmas/Metamorphosis/issues/20, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AFexoh9MZ6pMprK5CvJuycHxftGtBYYSks5sake-gaJpZM4O-EDU.
I run this model on my company’s server. Have you ever seen that fault before?
I have not. It feels like a situation where you have started a new model (or perhaps opened a model detached?), so that there is no “path” to the current model. Is that possible?
Thanks, Matt
From: ThongPhan89 [mailto:notifications@github.com] Sent: Tuesday, August 22, 2017 11:35 AM To: mattmas/Metamorphosis Metamorphosis@noreply.github.com Cc: Matt Mason mmason@rand.com; Comment comment@noreply.github.com Subject: Re: [mattmas/Metamorphosis] Error Snapshot in revit 2016 (#20)
I run this model on my company’s server. Have you ever seen that fault before?
— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/mattmas/Metamorphosis/issues/20#issuecomment-324064892, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AFexotncNfirF-CW63_BXkNKAXJ743Ohks5savU7gaJpZM4O-EDU.
You’re right about the detached model. So i will try again with central model and tell you the result. Thank you so much for your support!
Or a local copy (not detached). I’ll try to get a fix into the code so that it doesn’t behave so badly! -Matt
From: ThongPhan89 [mailto:notifications@github.com] Sent: Tuesday, August 22, 2017 11:38 AM To: mattmas/Metamorphosis Metamorphosis@noreply.github.com Cc: Matt Mason mmason@rand.com; Comment comment@noreply.github.com Subject: Re: [mattmas/Metamorphosis] Error Snapshot in revit 2016 (#20)
You’re right about the detach model. So i will try again with central model and tell you the result. Thank you so much for your support!
— You are receiving this because you commented. Reply to this email directly, view it on GitHubhttps://github.com/mattmas/Metamorphosis/issues/20#issuecomment-324065843, or mute the threadhttps://github.com/notifications/unsubscribe-auth/AFexoiDi3QYtCIAdcl87lRLCMd4pZ4Fnks5savX1gaJpZM4O-EDU.
I've checked and it works normally with central model in revit 2016. But in 2017, I can detach model and take snapshot. I hope you would fix this problem soon. Thank Matt!
Not sure why this has been left open for so long, but it's definitively closed now.
Dear Matt,
I'm using Metamorphosis with Revit 2016 and it has an error when I use Snapshot.![image](https://user-images.githubusercontent.com/28525991/29547168-b73608cc-8722-11e7-9c44-9d150ba2be8b.png)
Please review and check where the false is. Thank you so much!