search

mattytrog / FUSEE_SUITE

Part 1 and part 2
62 stars 12 forks source link

Can't Transfer files in to my switch over USB #8

Open enryson opened 1 year ago

enryson commented 1 year ago

Hi

I dont know if this is normal. i installed the XIAO board. Works fine. But i cant transfer files to my sdcard over USB cable. The switch appears on windows normaly by SDmount or MTP. but every single transfer fails

Any fix or something?

TTghostsemir commented 1 year ago

Use Hekate. If is also failed check your Cable and your Connection

bobmarley2021 commented 1 year ago

@enryson you've probably solved this now, but for future reference the problem you are experiencing is well known. It comes from:

  1. using too thin a wire on tx and rx
  2. not keeping tx and rx as short as possible
  3. dirty connections (dull joints)

90% of cases are 1 and 2. Use 36AWG for everything else but use 30AWG for tx and rx and keep them the shortest they can be (direct line to pads)

@TTghostsemir I see you're in the habit of resurrecting dead repos. This seems to be one of them and I could make a few suggestions if you'd consider forking...? One would be the ability to specify where hekate is located and what the filename is... the default of update.bin makes no sense to me.