search

maxbbraun / pisight

Apple iSight with a Raspberry Pi inside
https://pisight.camera
MIT License
420 stars 20 forks source link

Clarify STL file dimensions #7

Closed htreu closed 3 years ago

htreu commented 4 years ago

When uploading the STL file to a 3D print service the dimensions for the STL file must be specified. Clarify in the readme mm was used.

cooperpellaton commented 4 years ago

Bump on this. Was unsure of dimensions until I popped open PiSight.stl in Fusion and saw the units measured in mm. Having additional info would be good for others!

Screen Shot 2020-10-08 at 9 22 14 PM
htreu commented 3 years ago

This is ready to go.